These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Test Server Feedback

 
  • Topic is locked indefinitely.
 

[Crius] Current known issues

First post
Author
Previous Topic Next Topic
Opner Dresden
H A V O C
Fraternity.
#61 - 2014-06-14 21:24:04 UTC
When are we getting legit numbers for outposts and there upgrades? Fozzie was extremely quick to issue a proactive nerf to null sec indy work with the ice announcement but getting actual numbers on ME and time bonuses for outposts has been like pulling teeth.
MaverickScot
Diminishing Returns.
#62 - 2014-06-14 21:31:58 UTC
Just undocked on SISI and went to my POS which appears to be missing. It was unfuelled. Are you guys removing these POS's?
Teddyboom
NRDS Anonyme
We're all going to die.
#63 - 2014-06-15 14:38:20 UTC
CCP Nullarbor wrote:
Mismatch cost / tax errors are known and should be getting fixed today.


I tried to build in high sec 50 Standard X-Instinct Booster (110M estimated) today and got a job cost of 92M Shocked

i moved to a station in providence and got a 414k job cost

but when trying to start the job got this

"Unable to install job due to the following reasons:
The job cost has changed
Error.MISMATCH_COST (414818, 477527)"
Freyr Udan
Seal Team Six.
#64 - 2014-06-15 14:38:37 UTC
MaverickScot wrote:
Just undocked on SISI and went to my POS which appears to be missing. It was unfuelled. Are you guys removing these POS's?


They remove all poses on the SISI server you should mount it again


I can't manage to put up any job on starbase or on station because the

Unable to install job due to the following reasons:
Insufficient funds to pay job cost
Error.ACCOUNT_FUNDS (0.0, 697)

or the Error.Price have changed error
Laendra
Universalis Imperium
Goonswarm Federation
#65 - 2014-06-15 15:31:36 UTC
Anyone else able to anchor a Caldari Research Outpost? I didn't have any problems with any other type of outpost.
Laendra
Universalis Imperium
Goonswarm Federation
#66 - 2014-06-15 18:04:55 UTC
Laendra wrote:
Anyone else able to anchor a Caldari Research Outpost? I didn't have any problems with any other type of outpost.


Wow, finally able to anchor it after downtime. Hope that isn't a recurring issue.
Tragot Gomndor
Three Sword Inc
#67 - 2014-06-15 19:15:06 UTC
clearing cache actually fixed all my problems, including mismatch_cost errors... and even deleting launcher cache made launcher run again too...

NONONONONONO TO CAPS IN HIGHSEC NO
MaverickScot
Diminishing Returns.
#68 - 2014-06-15 21:21:52 UTC
Freyr Udan wrote:
MaverickScot wrote:
Just undocked on SISI and went to my POS which appears to be missing. It was unfuelled. Are you guys removing these POS's?


They remove all poses on the SISI server you should mount it again


Thanks.

Will this happen on the release of Crius on Tranq?
Mar'Dur Taren
The Copernicus Institute
#69 - 2014-06-16 09:11:32 UTC
Three issues to report.

1)
When you open the industry screen and go to the blueprints list. I select Owned by Corp and Current Station. The Hangar list shows an entry for every assembled container in each hangar. For example if you have three containers assembled in a Hangar called "BPOs" then you will have four entries in the list called "BPOs". There is no way to distinguish cans from hangars.

2)
Set up a manufacturing job. When you type in a Job Runs figure in the hundreds, the output does not change to reflect this. Also the material consumed, job duration and job cost don't change to suit. For example I try to put on a job of 500 x 100mn Afterburners and the "Outcome" says 5 output.

3)
Setting up a manufacturing job using a corp hangar for the material source. When I change the Input Material Location to a hangar with the right materials in it, it does not change the material list to indicate that materials are present or not. There is no refresh option.

Proud to be a Boffin!
CCP Contra
C C P
C C P Alliance
#70 - 2014-06-16 09:20:05 UTC
Teddyboom wrote:
CCP Nullarbor wrote:
Mismatch cost / tax errors are known and should be getting fixed today.


I tried to build in high sec 50 Standard X-Instinct Booster (110M estimated) today and got a job cost of 92M Shocked

i moved to a station in providence and got a 414k job cost

but when trying to start the job got this

"Unable to install job due to the following reasons:
The job cost has changed
Error.MISMATCH_COST (414818, 477527)"



Hey Teddyboom, thanks for your bug report. The Mismatch_Cost issue should be fixed, so this might be related to your client's cache. The best would be to delete manually your cache from the OS. If you can go to Users/Yourauser/AppData/Local/CCP/EVE/ find your SiSi client /cache
(more info here http://community.eveonline.com/support/knowledge-base/article.aspx?articleId=371)
And delete all the files, then try to manufacture the booster again. It should allow you to, if not, let me know so we can keep looking into this.
CCP Contra
C C P
C C P Alliance
#71 - 2014-06-16 09:21:04 UTC
MaverickScot wrote:
Freyr Udan wrote:
MaverickScot wrote:
Just undocked on SISI and went to my POS which appears to be missing. It was unfuelled. Are you guys removing these POS's?


They remove all poses on the SISI server you should mount it again


Thanks.

Will this happen on the release of Crius on Tranq?


This is just done when we copy the DB into SiSi, POSes should remain unchanged in TQ
Salpun
Global Telstar Federation Offices
Masters of Flying Objects
#72 - 2014-06-16 11:35:00 UTC
Please update the know issues post. Thanks

If i dont know something about EVE. I check https://wiki.eveonline.com/en/wiki/ISK_The_Guide

See you around the universe.
Galen Achu
Bellerophon Expedition
#73 - 2014-06-16 12:59:29 UTC
Mar'Dur Taren wrote:
Three issues to report.

1)
When you open the industry screen and go to the blueprints list. I select Owned by Corp and Current Station. The Hangar list shows an entry for every assembled container in each hangar. For example if you have three containers assembled in a Hangar called "BPOs" then you will have four entries in the list called "BPOs". There is no way to distinguish cans from hangars.

2)
Set up a manufacturing job. When you type in a Job Runs figure in the hundreds, the output does not change to reflect this. Also the material consumed, job duration and job cost don't change to suit. For example I try to put on a job of 500 x 100mn Afterburners and the "Outcome" says 5 output.

3)
Setting up a manufacturing job using a corp hangar for the material source. When I change the Input Material Location to a hangar with the right materials in it, it does not change the material list to indicate that materials are present or not. There is no refresh option.


1) identical result
2) identical result
3) This actually works for me but it takes a couple of seconds to process.
Badda Benjaminsen
Heimbrent
#74 - 2014-06-16 15:48:12 UTC
Input slot doesn't stick, output slot does. When switching input slot, it doesn't update. Have to close and reopen R&D windows and change input again for it to update.

Mad delays and freezes when switching between R&D tabs.

All funds errors I had was resolved by clearing cache manually deleting the whole cache folder.
MaverickScot
Diminishing Returns.
#75 - 2014-06-16 16:46:05 UTC
CCP Contra wrote:
MaverickScot wrote:
Freyr Udan wrote:
MaverickScot wrote:
Just undocked on SISI and went to my POS which appears to be missing. It was unfuelled. Are you guys removing these POS's?


They remove all poses on the SISI server you should mount it again


Thanks.

Will this happen on the release of Crius on Tranq?


This is just done when we copy the DB into SiSi, POSes should remain unchanged in TQ



Thanks

I learn something new every day Big smile
Bridgette d'Iberville
Better Killing Through Chemistry
#76 - 2014-06-16 16:49:47 UTC
CCP Contra wrote:
...then try to manufacture the booster again. It should allow you to, if not, let me know so we can keep looking into this.


Wait... we can produce drugs in Hi-Sec now? Is this just a SiSi thing?

"I considered a career in griefing, but then realized that I would never achieve the level of tear generation that CCP manages to do each and every expansion."
Kronossan
Bellum Esca
#77 - 2014-06-17 07:25:05 UTC  |  Edited by: Kronossan
CCP Contra wrote:
[quote=Teddyboom]

Hey Teddyboom, thanks for your bug report. The Mismatch_Cost issue should be fixed, so this might be related to your client's cache. The best would be to delete manually your cache from the OS. If you can go to Users/Yourauser/AppData/Local/CCP/EVE/ find your SiSi client /cache
(more info here http://community.eveonline.com/support/knowledge-base/article.aspx?articleId=371)
And delete all the files, then try to manufacture the booster again. It should allow you to, if not, let me know so we can keep looking into this.



Even after clearing my cache, I'm still receiving the Error.MISMATCH_COST (75, 68) error when I attempt to initiate any kind of industry job at a POS.

Edit: Strange, I'm not receiving the error anymore after having cleared the cache a second time.
Freyr Udan
Seal Team Six.
#78 - 2014-06-17 14:36:56 UTC
The Mismatch_Cost issue still there sometimes, i clean my cache and i'm able to do jobs with one character, but as soon as i change to another character i get the error again, cleaning de cache again seems solve the problem again


Another error i see is when you have your maximum possible jobs (9/9 in my case) and you deliver one, sometimes it not say you have 1 job available and the start button stay in red, but if you press it you can do the job
CCP Contra
C C P
C C P Alliance
#79 - 2014-06-18 08:54:55 UTC
Ok, thanks for the info, we will look at it right away
Alexander Lion
Suicidal Actions
#80 - 2014-06-18 10:32:12 UTC
The calculation of the ME and TE of invented T2 BPCs when using decryptors is wrong.

E.g: i want to invent a Heron BPC and use an Optimized Esoteric Attainment it increases the ME lvl instead of decreasing to -1.

So i could use an esoteric augmentation and would get a ME 2 TE 1 10 Run T2 BPC instead of a ME -2 TE 1 10 run BPC.