These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

EVE Information Portal

 
  • Topic is locked indefinitely.
 

EVE Online: Retribution 1.0 Issues

First post First post
Author
Previous Topic Next Topic
Thomas Gallant
Quafe Company Courier Shipping
#981 - 2012-12-10 11:59:48 UTC  |  Edited by: Thomas Gallant
as of 1.0.3 I can't seem to finish my copy blueprint jobs, it hangs til I cancel it with Esc.

Natasha Arnemen wrote:
Completed work in production line cannot be finished it remains stuck at "Completing job " statusOops


I was able to finish an invention job (failed if that's a factor), but not the copy research I was doing. what type of production were you doing?
Snoodaard Thrasy
Yulai Guard
#982 - 2012-12-10 12:05:21 UTC  |  Edited by: Snoodaard Thrasy
Natasha Arnemen wrote:
Completed work in production line cannot be finished it remains stuck at "Completing job " statusOops



Same problem!

Edit: perhaps there's a difference between POS and station jobs. My case is nullsec Amarr station manufacturing slots.
Mal Masters
Federal Navy Academy
Gallente Federation
#983 - 2012-12-10 12:05:31 UTC
Hi o7. This is my very first post in the forums and its just a small complaint, while salvaging my wrecks from missions an info box keeps popping up saying whether or not my salvage cycle was successful, sometimes it's too large and covers the icons of the targeted wrecks which then makes it impossible to tell which wreck needs a tractor beam to bring it in close. I hope CCP either moves the box lower or gives us the option to remove it entirely.
Thank you and fly safe. o7
Thomas Gallant
Quafe Company Courier Shipping
#984 - 2012-12-10 12:07:14 UTC
Snoodaard Thrasy wrote:
Natasha Arnemen wrote:
Completed work in production line cannot be finished it remains stuck at "Completing job " statusOops



Same problem!

Edit: perhaps there's a difference between POS and station jobs. My case is nullsec Amarr station manufacturing slots.


I'm doing it in a POS myself, it won't finish.
KHAAN DRAKE
JET SET COWBOY's
#985 - 2012-12-10 12:10:36 UTC  |  Edited by: ISD Suvetar
Merged with the Retribution issues thread - ISD Suvetar

The new bug is that I can not get my finished jobs out of ME so now I can not start any new ones! STUCK? WHAT THE ****! Did Ms Wilsons third grade reading class write the patch AGAIN!!
Musashi Date
#986 - 2012-12-10 12:11:56 UTC
Snoodaard Thrasy wrote:
Natasha Arnemen wrote:
Completed work in production line cannot be finished it remains stuck at "Completing job " statusOops



Same problem!

Edit: perhaps there's a difference between POS and station jobs. My case is nullsec Amarr station manufacturing slots.


Having the same problem, my manufacturing job can't be 'delivered'.. progress bar gets stuck loading.
szega
Minmatar Expeditions ltd.
#987 - 2012-12-10 12:12:46 UTC
Natasha Arnemen wrote:
Completed work in production line cannot be finished it remains stuck at "Completing job " statusOops


Same here.
Started two Manufacturing jobs in HS station, they are ready, but I cannot finish them either. Stucks at 'Completing job'.
shaun 27
Brothers of Tyr
Goonswarm Federation
#988 - 2012-12-10 12:16:31 UTC  |  Edited by: shaun 27
Can confirm its happening to me also cant complete jobs, just sticks, then you have to press esc otherwise it freezes your client. been petitioned so
Atlanti IV
Galactic Conglomerate
#989 - 2012-12-10 12:19:08 UTC
Cannot complete a copy job at my POS. It seems to be stuck in "Completing Job" Status...
Tarvos Telesto
Blood Fanatics
#990 - 2012-12-10 12:22:50 UTC
Same sound while using Amarr shutle, like OP mention this is horrible.

EvE isn't game, its style of living.
Reid Lutman
Brutor Tribe
Minmatar Republic
#991 - 2012-12-10 12:24:56 UTC
Can you check the hauler/faction spawns are working properly in the drones regions. I know they're supposed to be rare but this is worse than any other region i've been in. I haven't heard of anyone in cobalt getting a faction spawn. And the hauler spawns have dropped 1m trit or less.

Also transferring product from a launchpad to an empty customs office makes the product dissapear and does not show as present (or visible) in the customs office.
Remiel Pollard
Aliastra
Gallente Federation
#992 - 2012-12-10 12:25:32 UTC
Destination SkillQueue wrote:
Then bug report it, post about it in the feedback thread and pray that it gets a high priority. Other than that there really isn't anything you can do.


Already have, the moment I noticed it about ten minutes after Retribution went live.

“Some capsuleers claim that ECM is 'dishonorable' and 'unfair'. Jam those ones first, and kill them last.” - Jirai 'Fatal' Laitanen, Pithum Nullifier Training Manual c. YC104
Prootje
University of Caille
Gallente Federation
#993 - 2012-12-10 12:26:57 UTC
if you drag PI from a launchpad to the Customs office and the Customs office is empty, it disappears.

had it happen twice now, both with empty customs offices, on the customs offices in which there were other materials, the transfer went ok.
Tara Tyrael
Quantum Anomaly Corporation
#994 - 2012-12-10 12:27:35 UTC
Caldain Morrow wrote:

Salvage drone 3 should get me a 9% chance bonus and the base (according to eve uni) for small commander wrecks is 0% so with 5 drones working on a commander wreck it should eventually go through after (on average) 3 full cycles (9*5=45 on average).


You haven't pass statistics I assume.
If each of them has 9% chance you can't just add it up for 45%.
DuckHerder
Duck Unlimited
#995 - 2012-12-10 12:31:45 UTC
Hi,

Noticed this when trying to edit inventory filters.

I have a filter setup for projectile ammo that I set up like this:

"Group" - "Is" - "Charge" - "Projectile Ammo"

however, when editing the filter again it shows like this:

"Group" - "Is" - "Charge" - "All"

The filter still works fine, it just displays incorrectly when editing. This is mainly a problem when trying to edit filters with multiple lines. This occurs with all of my filters which are set up as "Group" "Is" type filters. Easy to replicate - just open inventory -> right-click filter -> click edit

Screenshot

Loving the rebalanced ships,

Duck
Caldain Morrow
Native Freshfood
Minmatar Republic
#996 - 2012-12-10 12:52:01 UTC
Tara Tyrael wrote:
Caldain Morrow wrote:

Salvage drone 3 should get me a 9% chance bonus and the base (according to eve uni) for small commander wrecks is 0% so with 5 drones working on a commander wreck it should eventually go through after (on average) 3 full cycles (9*5=45 on average).


You haven't pass statistics I assume.
If each of them has 9% chance you can't just add it up for 45%.


coincidentally, no. My math is probably wrong and I'll admit it. Still if you have 60 cycles per drone and 5 drones that's effectively 300 chances to get a 9% chance. I should also note that I have yet to salvage a commander wreck with drones and even with luck like mine I should have had one success. I'm only quoting the one time that I timed how long i had the drones active on the wreck to test my the pattern I was noticing.
Yeta Lias
Viziam
Amarr Empire
#997 - 2012-12-10 12:52:47 UTC
Error acured:
10.12.2012 aftter Downtime

Error description:
Transfer items from planet launchpad (right side of customs office) to the custom office in orbit (left side of custom office). After moving, and hitting transfer, the items vanish. Used Items T1 PI products eg Biomass, Silicon and Industrial fibers. Each about 10.000 up to 19.000 each, 100% vanished. Planet types accordingly temperate, lava & oceanic.

Tested on three custom offices, error was accuring always 3 different customs offices 0sec and 2 different systems.


Yours
Yeta
Xillxan
Exopause
#998 - 2012-12-10 12:57:48 UTC
Prootje wrote:
if you drag PI from a launchpad to the Customs office and the Customs office is empty, it disappears.

had it happen twice now, both with empty customs offices, on the customs offices in which there were other materials, the transfer went ok.


^This. The transfered material appears in the customs office after a re-login. And not only from launchpads, also happens when transfering items from ship cargoholds.
Roman Fuego
Brotherhood of Bankrupt Bastards
#999 - 2012-12-10 13:04:57 UTC
I just started on 1.0.3 and I cannot complete any industry jobs. I've tried the following:

1) Complete a batch remotely
2) Complete a single one remotely
3) Fly to station and try to complete locally

In all cases... no joy...
Telthea
Caldari Provisions
Caldari State
#1000 - 2012-12-10 13:11:11 UTC
"Natasha Arnemen" wrote:
Completed work in production line cannot be finished it remains stuck at "Completing job " status


Same problem here, stuck on Delivering Job. Cleared cashes and still the same.