These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Science & Industry

 
  • Topic is locked indefinitely.
123Next pageLast page
 

All BPs, Reactions, and Datacore Calculator - EVE Isk per Hour! (w/Crucible)
Author
Previous Topic Next Topic
Zifrian
The Frog Pond
Ribbit.
#1 - 2011-09-09 03:34:41 UTC  |  Edited by: Zifrian
Please use this thread for Version 2.0: https://forums.eveonline.com/default.aspx?g=posts&t=63663&find=unread

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
kyrieee
The Scope
Gallente Federation
#2 - 2011-09-09 21:06:42 UTC
The basic reactions aren't being calculated properly. Simple reactions take 100 + 100 input and output 200, but currently profits are being calculated with 100 output. Steps to reproduce:
Pick a simple reaction, for example Rolled Tungsten Alloy Reaction, set Platinum price to zero (first input), set Tungsten price to one ISK (2nd input), set Rolled Tungsten Alloy price to 1 ISK (output) and then set POS fuel cost to zero.

Profit should be 100 ISK / hr since you spend 100 * 0 + 100 * 1 and get 200 * 1, but it shows up as zero.
Zifrian
The Frog Pond
Ribbit.
#3 - 2011-09-10 02:16:15 UTC
kyrieee wrote:
The basic reactions aren't being calculated properly. Simple reactions take 100 + 100 input and output 200, but currently profits are being calculated with 100 output. Steps to reproduce:
Pick a simple reaction, for example Rolled Tungsten Alloy Reaction, set Platinum price to zero (first input), set Tungsten price to one ISK (2nd input), set Rolled Tungsten Alloy price to 1 ISK (output) and then set POS fuel cost to zero.

Profit should be 100 ISK / hr since you spend 100 * 0 + 100 * 1 and get 200 * 1, but it shows up as zero.


OK thanks for this. I'll take a look at it soon.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Khaemwese
Stay Frosty.
A Band Apart.
#4 - 2011-09-10 15:28:15 UTC  |  Edited by: Khaemwese
Very promising piece of software, thanks for sharing it with the rest of us.

I'm having issues with the blueprint management. First I set the component blueprints I own to "Owned Yes". Everything was fine until I noticed a T2 blueprint showing I could not make one of the components, I looked it up and sure enough the "Owned" flag was set to "No". I tried to set it back to "Yes" and others started to change to "No". Really strange...

The current state right now is that if I set one by one, they toggle to "Yes", but if I try to set multiple BPs at the same time, they all go back to "No". Any ideas?


** EDIT ** It seems that I was able to fix the problem by rebooting my computer. Maybe an Access issue?

** EDIT 2 ** It happened again... I guess I found what triggers the problem... It seems the Owned flag gets toggled when you touch other flags even when they are not selected, I have a BPO that is currently in manufacturing and therefore is not discovered as corp asset, so when I try to flag it as owned, it changes all other owned flags to not owned. From that point on, it's a mess and I have to reset everything and start from scratch.

Also I found another problem. The relationship between the Meta modules is mixed up. For example, 720mm Autocannons are using the 650mm Meta modules for the invention calculations, the same with MWDs and ABs.
Rhett Riever
#5 - 2011-09-12 10:59:25 UTC
Khaemwese wrote:

Also I found another problem. The relationship between the Meta modules is mixed up. For example, 720mm Autocannons are using the 650mm Meta modules for the invention calculations, the same with MWDs and ABs.


I'm seeing the same with dual 650mm RA

Takes me a while to get used to new stuff, but I'm quite liking this so far
Zifrian
The Frog Pond
Ribbit.
#6 - 2011-09-12 15:07:36 UTC
OK thanks for the updates. I've been busy working on the API change, which I hope to have up tonight, so I haven't been able to look at your reports in detail. I'll try and get those fixed ASAP.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Zifrian
The Frog Pond
Ribbit.
#7 - 2011-09-13 03:16:03 UTC
kyrieee wrote:
The basic reactions aren't being calculated properly. Simple reactions take 100 + 100 input and output 200, but currently profits are being calculated with 100 output. Steps to reproduce:
Pick a simple reaction, for example Rolled Tungsten Alloy Reaction, set Platinum price to zero (first input), set Tungsten price to one ISK (2nd input), set Rolled Tungsten Alloy price to 1 ISK (output) and then set POS fuel cost to zero.

Profit should be 100 ISK / hr since you spend 100 * 0 + 100 * 1 and get 200 * 1, but it shows up as zero.


This has been corrected in the latest update. Please let me know if you see any other issues with reactions. It's much appreciated.

Khaemwese wrote:
** EDIT 2 ** It happened again... I guess I found what triggers the problem... It seems the Owned flag gets toggled when you touch other flags even when they are not selected, I have a BPO that is currently in manufacturing and therefore is not discovered as corp asset, so when I try to flag it as owned, it changes all other owned flags to not owned. From that point on, it's a mess and I have to reset everything and start from scratch.


I just got the API update done, so I will focus on this next. There were a few others having issues with BP management as well. I'll update here when I get it fixed. Thanks for the detail on the issue.

Khaemwese wrote:
Also I found another problem. The relationship between the Meta modules is mixed up. For example, 720mm Autocannons are using the 650mm Meta modules for the invention calculations, the same with MWDs and ABs.


Thanks for the report. Turns out determining meta items from the data isn't very clear (at far as I can tell) so I'll have to revisit this to see if I can get something working that is more consistent. The examples are useful to figuring this out so thanks.


Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Zifrian
The Frog Pond
Ribbit.
#8 - 2011-09-13 03:28:15 UTC
I have implemented the new customizable API. Your old API will no longer be used as CCP will be disabling them soon.

EVE IPH utilizes the following 3 access mask data:

- Public Information: Standings
- Private Information: Character Sheet (for skills)
- Private Information: Asset List

Please be sure to have these checked in the API you enter into EVE IPH or you will not be able to access all the features. Click HERE for a predefined API you can save for use with EVE IPH.

If you have any issues, let me know.

As always, Thanks! Smile

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Manny Spartan
EnigmaticS Industrial
#9 - 2011-09-14 12:26:23 UTC
I posted a message but it didn't show up! sorry if it is a duplicate.

I use IPH and I love it but since the customizable API is live I have a problem. I enter ID and Key and it detects my character name but then it ask me to select a default character but the window is completely empty and I have no selection option so I need to cancel it to proceed and then it is like I have no character set up. Please help me fix this.

Thanks for the excellent work and your attention

TEST Alliance Please Join
Zifrian
The Frog Pond
Ribbit.
#10 - 2011-09-14 17:28:41 UTC
Manny Spartan wrote:
I posted a message but it didn't show up! sorry if it is a duplicate.

I use IPH and I love it but since the customizable API is live I have a problem. I enter ID and Key and it detects my character name but then it ask me to select a default character but the window is completely empty and I have no selection option so I need to cancel it to proceed and then it is like I have no character set up. Please help me fix this.

Thanks for the excellent work and your attention


Someone else had this problem as well. I suggested they get the latest version and reenter the same API info. It worked for them. I'm not sure what is causing that issue but I'll try and track it down.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Zifrian
The Frog Pond
Ribbit.
#11 - 2011-09-15 01:08:00 UTC  |  Edited by: Zifrian
Khaemwese wrote:
Very promising piece of software, thanks for sharing it with the rest of us.

I'm having issues with the blueprint management. First I set the component blueprints I own to "Owned Yes". Everything was fine until I noticed a T2 blueprint showing I could not make one of the components, I looked it up and sure enough the "Owned" flag was set to "No". I tried to set it back to "Yes" and others started to change to "No". Really strange...

The current state right now is that if I set one by one, they toggle to "Yes", but if I try to set multiple BPs at the same time, they all go back to "No". Any ideas?


** EDIT ** It seems that I was able to fix the problem by rebooting my computer. Maybe an Access issue?

** EDIT 2 ** It happened again... I guess I found what triggers the problem... It seems the Owned flag gets toggled when you touch other flags even when they are not selected, I have a BPO that is currently in manufacturing and therefore is not discovered as corp asset, so when I try to flag it as owned, it changes all other owned flags to not owned. From that point on, it's a mess and I have to reset everything and start from scratch..


This should be fixed now. Let me know if you have any issues.

Linda Shadowborn wrote:
*** From previous Thread ***
Was trying to use the manufacturing tab and to check Laser Focusing Crystals (for some reason it wouldnt come up, i tried to untick all the boxes apart from components (you know the ship, module, rig..) and ..got that error.


This has been fixed. Thanks for finding this. Simple bug but was causing the Components not to show correctly. Laser Focusing Crystals will now be in the manufacturing screen.

Veleck wrote:
*** From previous Thread ***
I am trying out your tool, and it's interesting. However, I have a problem when trying to enter Owned BPs. I can add one just fine, but when I use the "BP Search" to add another, then enter the ME and PE of the one I want and click "Update Selected" it sets the information for the new BP, but marks all previous set BPs as unowned.

Am I doing something wrong or is this a bug? I cannot scan corporate assets because I don't have the required roles. Entering them all in manually is proving impossible with my current method.


This has also been fixed. Let me know if there any issues.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Zippie August
#12 - 2011-09-15 15:32:49 UTC
Zifrian wrote:
Manny Spartan wrote:
I posted a message but it didn't show up! sorry if it is a duplicate.

I use IPH and I love it but since the customizable API is live I have a problem. I enter ID and Key and it detects my character name but then it ask me to select a default character but the window is completely empty and I have no selection option so I need to cancel it to proceed and then it is like I have no character set up. Please help me fix this.

Thanks for the excellent work and your attention


Someone else had this problem as well. I suggested they get the latest version and reenter the same API info. It worked for them. I'm not sure what is causing that issue but I'll try and track it down.


I did have same problem when i was trying to create api with Zippe August(Corp), seems to work when you pick character: All
Khaemwese
Stay Frosty.
A Band Apart.
#13 - 2011-09-15 23:27:26 UTC
I'm having trouble with the new API keys. Seems that no matter what I try, I always get "You do not have a corporation key installed with access to Assets." when trying to Scan Corp Assets in the Blueprint Management window.

It should work with a Corporation type key and Access Mask 2, right? I even tried it setting up all flags, but always the same result.
Zifrian
The Frog Pond
Ribbit.
#14 - 2011-09-16 01:39:49 UTC
Khaemwese wrote:
I'm having trouble with the new API keys. Seems that no matter what I try, I always get "You do not have a corporation key installed with access to Assets." when trying to Scan Corp Assets in the Blueprint Management window.

It should work with a Corporation type key and Access Mask 2, right? I even tried it setting up all flags, but always the same result.


Thanks for reporting this. I have fixed it. Check for updates to get the change.

Also upgraded to Incarna 1.1.45834 Datadump.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Zifrian
The Frog Pond
Ribbit.
#15 - 2011-09-17 00:51:42 UTC
Zippie August wrote:
Zifrian wrote:
Manny Spartan wrote:
I posted a message but it didn't show up! sorry if it is a duplicate.

I use IPH and I love it but since the customizable API is live I have a problem. I enter ID and Key and it detects my character name but then it ask me to select a default character but the window is completely empty and I have no selection option so I need to cancel it to proceed and then it is like I have no character set up. Please help me fix this.

Thanks for the excellent work and your attention


Someone else had this problem as well. I suggested they get the latest version and reenter the same API info. It worked for them. I'm not sure what is causing that issue but I'll try and track it down.


I did have same problem when i was trying to create api with Zippe August(Corp), seems to work when you pick character: All


This has been fixed.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Boris Sandstorm
Electro Manufacturing
#16 - 2011-09-17 09:36:12 UTC
Great Ap Zifrian Smile

Couple of feature requests...

1) Could you have it so you can right click - set price on items in the update prices tab rather than have to search?

2) Any chance of getting an option to pull prices from local cache rather than Eve Central?
Zifrian
The Frog Pond
Ribbit.
#17 - 2011-09-17 11:23:30 UTC
Boris Sandstorm wrote:
Great Ap Zifrian Smile

Couple of feature requests...

1) Could you have it so you can right click - set price on items in the update prices tab rather than have to search?

2) Any chance of getting an option to pull prices from local cache rather than Eve Central?


The right click (or probably just select the item and type it into the grid) option is already on the list. Hope I can implement it soon.

On pulling from local cache, do you mean from an xml file or something? Or do you just want to change to max buy/ min sell without updating from eve central? ie. add a bypass button to only use local prices after you set them

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Boris Sandstorm
Electro Manufacturing
#18 - 2011-09-22 12:55:35 UTC
Zifrian wrote:

On pulling from local cache, do you mean from an xml file or something? Or do you just want to change to max buy/ min sell without updating from eve central? ie. add a bypass button to only use local prices after you set them


Thanks for the reply on the right click set price Big smile

Yeah by pulling from the local cache I mean from the cache files that are created on your PC when you view market date. AFAIK thats how eve central gets its data from their client readming the cache file.

Some info on it here and the source library's used to do it here (I think)

I'm just thinking it might prove a more reliable source if you want to pull in live Jita market data while sitting on an alt in 4-4 as the eve-central prices are sometimes a bit screwed.
Wot I Think
Doomheim
#19 - 2011-09-26 13:31:13 UTC
Your program fights with iTunes, every time I do a price update my playlists poof and Sugar Ray takes over.

What is wrong, fix your app broSad
Emma Royd
Maddled Gommerils
#20 - 2011-09-26 19:47:04 UTC
I've just installed 1.3 and starting to set it up.

Will it find blueprints that are in containers? both personal and corp, most of mine are in cans to keep them organised.

thx

Emma
123Next pageLast page