These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

EVE Information Portal

 
  • Topic is locked indefinitely.
 

EVE Online: Odyssey 1.1 Issues

First post
Author
Previous Topic Next Topic
Captain Charismatic
Static Therapy
#61 - 2013-09-03 13:48:44 UTC
Nudgey Nald wrote:



Good idea :), although the patch installer should really cover this and if it is the case I am sure there would be a lot more people reporting. I am can see files written to the install folder so not sure what extra permission it would require assuming it is files only. Still in future i think ill make sure i'm on a nice connection in case i need to 'retry' and take the softly softly approach.




Believe me I thought it did too. I see it writing files as well, but I'm still saying that for the last few major updates, running as admin has fixed my issues.

Perhaps it's because of the fact that my client is on a drive separate from my OS drive, which gets reinstalled frequently. Perhaps the drive I have it on has messed up permissions, I really don't care either way. All I know is that this simple thing has fixed my issues.

I am also in the slow connection club and it's extremely irritating when a patch that took ~3 hours to download fails and then refuses to do anything but download it all again. But like I said, it was my own fault, and that did fix it.
pmchem
Brutor Tribe
Minmatar Republic
#62 - 2013-09-03 13:49:05 UTC
patcher failed 3x

repair.exe worked first try

https://twitter.com/pmchem/ || http://community.eveonline.com/news/dev-blogs/community-spotlight-garpa/ || Goonswarm Economic Warfare Cabal
RyzeX
Brutor Tribe
Minmatar Republic
#63 - 2013-09-03 13:50:06 UTC
So do we have any soulution for applaying the patch??? Can you give us the patch so we can manualy download it??
i'm trying for 2h to patch the damn client. Give us a solution!!!
Captain Charismatic
Static Therapy
#64 - 2013-09-03 13:52:38 UTC
Again guys, for those trying to apply patch, restart your launcher with admin privileges and try it again.

Repair.exe runs with extended privs by default as I can tell, and that may or may not be why it's working for people. So try both.
RyzeX
Brutor Tribe
Minmatar Republic
#65 - 2013-09-03 13:58:29 UTC
Captain Charismatic wrote:
Again guys, for those trying to apply patch, restart your launcher with admin privileges and try it again.

Repair.exe runs with extended privs by default as I can tell, and that may or may not be why it's working for people. So try both.


i tryed everything, waiting for CCP answer to this bug now. Btw repair tool stucks at 3/7 aswell ...
Kailea Ghosti
Doomheim
#66 - 2013-09-03 14:04:16 UTC
razernc wrote:
This is taking the mick, 3 times now...

Mine finally worked the second time, I dont know how you tolerate that lol. If it didnt work this time, and they were forcing me to download this patch for a 3rd time, I would of just unsubed my 3 accounts and quit, and never looked back.
Anna Maziarczyk
The Scope
Gallente Federation
#67 - 2013-09-03 14:04:24 UTC


2013-09-03 06:19:35,585 - ch_exceptions - log - CH_LOG - ApplyPatchError
Traceback (most recent call last):
File "lib\update.pyo", line 620, in run
File "lib\update.pyo", line 785, in _Update
File "lib\update.pyo", line 760, in ApplyPatch
WindowsApplyPatchError

Then all the details follow....
CCP karkur
C C P
C C P Alliance
#68 - 2013-09-03 14:04:53 UTC
BubbaG Garuda wrote:
Experienced some issues with the drone window.

I launched some drones and after a bit, I recalled them. The drone window (and the header of the window) still shows the group window for those appearing to be out in the space (although no drones show up under the group).

The header also shows 5 drones out of max 5 in space (although none are).

I relaunch my drones, and nothing changes in the Drone window, although the overview shows the drones are in space, playing happily along. The drones are not showing at all in the Drones in space part of the Drone window so I have no way of assessing any damage to my drones.

In other words, it appears that something made the Drone window stop updating. Also, after recalling my drones, the group still shows them as out in space, so I can not relaunch without going to the drone bay and selecting the drones and choosing Launch.

BubbaG

Could you please file a bugreport on it, preferable from within the client in the play session where it has failed.
Thanks Smile

CCP karkur | Programmer | Team Five 0 | @CCP_karkur
Trena
Moo Cow Industries
#69 - 2013-09-03 14:10:40 UTC  |  Edited by: Trena
CCP Habakuk wrote:
For those with problems with the launcher getting stuck while patching: Please restart your launcher.

For the case that this does not help: Please send a bug report and attach launcher log files ( in the client folder /launcher/cache/launcher.2013.09.03.log)


Where's the location of the log file on a mac? I found all of the other log files, but apparently launcher logs go into a special/different place.

edit:
Launcher error I'm seeing is:

Exception during UpdaterModule.Update
Traceback (most recent call last):
File "lib/update.pyc", line 617, in run
File "lib/update.pyc", line 782, in _Update
File "lib/update.pyc", line 752, in ApplyPatch
File "lib/update.pyc", line 516, in Run
File "zsync/zsync.pyc", line 1286, in ApplyPatch
File "zsync/zsync.pyc", line 1175, in LoadPatch
ImportError: No module named createrepairdata.dataPackage
Dinsdale Pirannha
Pirannha Corp
#70 - 2013-09-03 14:10:48 UTC
CCP karkur wrote:
BubbaG Garuda wrote:
Experienced some issues with the drone window.

I launched some drones and after a bit, I recalled them. The drone window (and the header of the window) still shows the group window for those appearing to be out in the space (although no drones show up under the group).

The header also shows 5 drones out of max 5 in space (although none are).

I relaunch my drones, and nothing changes in the Drone window, although the overview shows the drones are in space, playing happily along. The drones are not showing at all in the Drones in space part of the Drone window so I have no way of assessing any damage to my drones.

In other words, it appears that something made the Drone window stop updating. Also, after recalling my drones, the group still shows them as out in space, so I can not relaunch without going to the drone bay and selecting the drones and choosing Launch.

BubbaG

Could you please file a bugreport on it, preferable from within the client in the play session where it has failed.
Thanks Smile


So based in the amount of people who are currently online, and comparing that to the quantity that are normally online at this time, CCP has introduced fail code that affects somewhere between 30 and 45% of their sub base.

How does this get past quality control?
ArmyOfMe
African Atomic.
#71 - 2013-09-03 14:13:44 UTC
/Golfclap.

Only had to download the patch 4 times, run the repair tool twice etc for it to work

GM Guard > I must ask you not to use the petition option like this again but i personally would finish the chicken sandwich first so it won´t go to waste. The spaghetti will keep and you can use it the next time you get hungry. Best regards.
Guttripper
State War Academy
Caldari State
#72 - 2013-09-03 14:15:43 UTC
While it has been pointed out already, the launcher stopped for me and restarting it worked like a charm afterwards. No need to download the patch again or anything of that sort: obtain patch, launcher stops, restart launcher, patch applies, game running smoothly.

Windoze XP Professional
Version 2002
Service Pack 3

Everyone was mentioning newer operating systems so I figured to mention an old version had the same stoppage results.
Hyi Max
Garoun Investment Bank
Gallente Federation
#73 - 2013-09-03 14:35:16 UTC
I started exefile.exe as usual this morning, and it got stuck. It sat there "checking status" indefinitely. When there is a patch, it usually tells me so, and pulls down a 6 MB file and executes it, initiating the update process.

That did not work, so I ran repair.exe. NOTHING. Not even a flicker on the screen.

So I ran the launcher, and I got a white box with a black stripe on the top that says "Eveonline Launcher V2.1.571330." Thats it. No complete launcher screen, and no downloads.

I killed the exefile.exe, and started it again. Again it sat there stuck in "checking status"

When I tried repair.exe again, then it started to come alive. Repair complained that exefile.exe was holding a file that repair wanted to touch, so I closed exefile. Then repair complained that the launcher was holding a file that it wanted to update, so I closed the white box that is the launcher.

Now repair.exe is busily downloading stuff-- 3.3% of 751.24MB complete...

Now was there an easier way to do that ? :-)
Basilia Wenclara
Anvil Capital Trading
#74 - 2013-09-03 14:37:44 UTC
Your launcher does not download unless the mouse is quite literally hovering over it.

Seriously, I want to browse things while downloading your huge patches.

What a joke.
Lair Osen
#75 - 2013-09-03 14:42:41 UTC
Radial Menu + AutoPilot

Not sure if this is intended but when the Autopilot infobar is minimised to one line, the link doesn't bring up a radial menu.

Also wondering about the set destination primary option. Its greyed out for the sun and not there for belts in system. Why not just make it an active primary for both of those?
seth Hendar
I love you miners
#76 - 2013-09-03 14:44:56 UTC
Dinsdale Pirannha wrote:
CCP karkur wrote:
BubbaG Garuda wrote:
Experienced some issues with the drone window.

I launched some drones and after a bit, I recalled them. The drone window (and the header of the window) still shows the group window for those appearing to be out in the space (although no drones show up under the group).

The header also shows 5 drones out of max 5 in space (although none are).

I relaunch my drones, and nothing changes in the Drone window, although the overview shows the drones are in space, playing happily along. The drones are not showing at all in the Drones in space part of the Drone window so I have no way of assessing any damage to my drones.

In other words, it appears that something made the Drone window stop updating. Also, after recalling my drones, the group still shows them as out in space, so I can not relaunch without going to the drone bay and selecting the drones and choosing Launch.

BubbaG

Could you please file a bugreport on it, preferable from within the client in the play session where it has failed.
Thanks Smile


So based in the amount of people who are currently online, and comparing that to the quantity that are normally online at this time, CCP has introduced fail code that affects somewhere between 30 and 45% of their sub base.

How does this get past quality control?

like everything else, right through.

hint: there is NO QA!
USS OMAHA
State Protectorate
Caldari State
#77 - 2013-09-03 14:57:08 UTC
So yip, Tenth failed download. All with admin rights 5 launcher, 5 repair.

Monthly internet cap be damned..CCP hamsters wanna win this electronic pvp battle Shocked
Apex142
Vengance Inc.
#78 - 2013-09-03 15:01:00 UTC
Experiencing Issues with Scanner Map:

Seem Signatures on the map DO NOT refresh position/status once scanned down to red dots.

Tested this by scanning down sig to red dot level, then moved probes away from location, rescan, and signature information remains but at 0% strength, but window for message of "No Signatures Detect" is displayed, even though signature is still displayed as a red dot on the map.

Don't know if this is a glitch or new "feature" of Odyssey scanning.

Can cause multiple results of the same signature to be displayed.
Luc Chastot
#79 - 2013-09-03 15:02:45 UTC
Maybe it's time to roll back the launchers and not implement it until it works properly?

Stuck at "Applying patch".

Make it idiot-proof and someone will make a better idiot.

CCP Paradox
#80 - 2013-09-03 15:06:33 UTC
Apex142 wrote:
Experiencing Issues with Scanner Map:

Seem Signatures on the map DO NOT refresh position/status once scanned down to red dots.

Tested this by scanning down sig to red dot level, then moved probes away from location, rescan, and signature information remains but at 0% strength, but window for message of "No Signatures Detect" is displayed, even though signature is still displayed as a red dot on the map.

Don't know if this is a glitch or new "feature" of Odyssey scanning.

Can cause multiple results of the same signature to be displayed.


The message "No signatures detected" is referring to the scan you just did. The 0% signals are still not detected, the information is just retained there for convenience.

CCP Paradox | EVE QA | Team Phenomenon

Space Magician