These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Ships & Modules

 
  • Topic is locked indefinitely.
12Next page
 

Odyssey Typhoon fit?
Author
Previous Topic Next Topic
Atlas Arnst
Brutor Tribe
Minmatar Republic
#1 - 2013-05-20 02:20:47 UTC  |  Edited by: Atlas Arnst
All the cruise missile & battleship changes coming in Odyssey have made me want to try creating a fit for that ugly old ship the Typhoon, right now just for missions, however I'm absolutely awful at this and need some help, here's my first attempt at it, any help would be very appreciated.

[Typhoon, Typhoon]
Co-Processor II
Drone Damage Amplifier II
Drone Damage Amplifier II
Drone Damage Amplifier II
Ballistic Control System II
Ballistic Control System II
Ballistic Control System II

Dread Guristas X-Large Shield Booster
Thermic Disappation Field II
Kinetic Deflection Field II
Heavy Capacitor Booster II
Phased Weapon Navigation Array Generation Extron

'Arbalest' Cruise Launcher I, Scourge Cruise Missile
'Arbalest' Cruise Launcher I, Scourge Cruise Missile
'Arbalest' Cruise Launcher I, Scourge Cruise Missile
'Arbalest' Cruise Launcher I, Scourge Cruise Missile
'Arbalest' Cruise Launcher I, Scourge Cruise Missile
'Arbalest' Cruise Launcher I, Scourge Cruise Missile
[empty high slot]
[empty high slot]

Large Warhead Flare Catalyst I
Large Warhead Rigor Catalyst I
Large Warhead Rigor Catalyst I

Hobgoblin II x5
Dato Koppla
Spaghetti Militia
#2 - 2013-05-20 02:25:19 UTC
Drop the cap recharger for a Heavy Capacitor Booster, drop the LCDCS rigs for Large Warhead Rigor Catalyst rigs. Use a DG/CN X-Large booster to solve your CPU problems, you can then switch the power diagnostic units for whatever you want, ECCM, Signal Amplifier, Damage Control, maybe fit some arties and tracking enhancers.

I would go with an armor tank for the Phoon as that gives you lots of room for utility.
Atlas Arnst
Brutor Tribe
Minmatar Republic
#3 - 2013-05-20 02:41:23 UTC
Dato Koppla wrote:
Drop the cap recharger for a Heavy Capacitor Booster, drop the LCDCS rigs for Large Warhead Rigor Catalyst rigs. Use a DG/CN X-Large booster to solve your CPU problems, you can then switch the power diagnostic units for whatever you want, ECCM, Signal Amplifier, Damage Control, maybe fit some arties and tracking enhancers.

I would go with an armor tank for the Phoon as that gives you lots of room for utility.
Those faction shield boosters are a bit too expensive for me, I'll be armor tanking it then, I'll also change out the rigs.

The new Typhoon has a bonus to explosive velocity, would fitting 2 rigor catalysts + a loading accelerator work?

Thanks for the quick reply.
stoicfaux
#4 - 2013-05-20 03:07:50 UTC
Atlas Arnst wrote:
Dato Koppla wrote:
Drop the cap recharger for a Heavy Capacitor Booster, drop the LCDCS rigs for Large Warhead Rigor Catalyst rigs. Use a DG/CN X-Large booster to solve your CPU problems, you can then switch the power diagnostic units for whatever you want, ECCM, Signal Amplifier, Damage Control, maybe fit some arties and tracking enhancers.

I would go with an armor tank for the Phoon as that gives you lots of room for utility.
Those faction shield boosters are a bit too expensive for me, I'll be armor tanking it then, I'll also change out the rigs.

The new Typhoon has a bonus to explosive velocity, would fitting 2 rigor catalysts + a loading accelerator work?

Thanks for the quick reply.

Oddly enough, 2x rigors and a flare. If you insist on a BLA, then you must use a BLA II. (A BLA I would get stacking penalized into nothing.)

Pon Farr Memorial: once every 7 years, all the carebears in high-sec must PvP or they will be temp-banned.
Garviel Tarrant
Beyond Divinity Inc
Shadow Cartel
#5 - 2013-05-20 03:27:09 UTC
Holy stacking batman jesus

Surely there is a better use for those low slots than the 4th ballistic

Even just a damage control.

BYDI recruitment closed-ish

Atlas Arnst
Brutor Tribe
Minmatar Republic
#6 - 2013-05-20 03:39:42 UTC
stoicfaux wrote:
Atlas Arnst wrote:
Dato Koppla wrote:
Drop the cap recharger for a Heavy Capacitor Booster, drop the LCDCS rigs for Large Warhead Rigor Catalyst rigs. Use a DG/CN X-Large booster to solve your CPU problems, you can then switch the power diagnostic units for whatever you want, ECCM, Signal Amplifier, Damage Control, maybe fit some arties and tracking enhancers.

I would go with an armor tank for the Phoon as that gives you lots of room for utility.
Those faction shield boosters are a bit too expensive for me, I'll be armor tanking it then, I'll also change out the rigs.

The new Typhoon has a bonus to explosive velocity, would fitting 2 rigor catalysts + a loading accelerator work?

Thanks for the quick reply.

Oddly enough, 2x rigors and a flare. If you insist on a BLA, then you must use a BLA II. (A BLA I would get stacking penalized into nothing.)

You're right, I didn't think about that, the ROF bonus from rigs probably doesn't stack too well with ship ROF bonuses, I'll swap it out for a flare rig, or maybe a calefaction rig?

I've updated the fit, check the first post please.
Chainsaw Plankton
FaDoyToy
#7 - 2013-05-20 04:35:43 UTC
Garviel Tarrant wrote:
Holy stacking batman jesus

Surely there is a better use for those low slots than the 4th ballistic

Even just a damage control.



it is a pve fit, so not really.

@ChainsawPlankto on twitter
Liang Nuren
No Salvation
Divine Damnation
#8 - 2013-05-20 05:33:28 UTC  |  Edited by: Liang Nuren
If you're ok with a 3 slot armor tank, 4 CN BCUs, a BLA II, and 2 Flare Is is the optimal Typhoon setup.

-Liang

Ed: That tank though.... it looks kinda thin to me.

I'm an idiot, don't mind me.
Garviel Tarrant
Beyond Divinity Inc
Shadow Cartel
#9 - 2013-05-20 05:48:19 UTC
Chainsaw Plankton wrote:
Garviel Tarrant wrote:
Holy stacking batman jesus

Surely there is a better use for those low slots than the 4th ballistic

Even just a damage control.



it is a pve fit, so not really.



PVE is so weird ;_;

BYDI recruitment closed-ish

Tsukino Stareine
Garoun Investment Bank
Gallente Federation
#10 - 2013-05-20 06:46:58 UTC
If you're going to 3 slot tank you can't cheapo fit it.

Art of Explosions
Atlas Arnst
Brutor Tribe
Minmatar Republic
#11 - 2013-05-20 06:56:51 UTC
Tsukino Stareine wrote:
If you're going to 3 slot tank you can't cheapo fit it.
Definitely, I tested it out on the test server and it was a disaster, I'm going to try fitting a shield tank again, I think I can make it work it'll just take some trial and error.
Liang Nuren
No Salvation
Divine Damnation
#12 - 2013-05-20 07:07:02 UTC
A 4 slot armor tank should be fine, but shield tanking with 2-3 painters may work even better still.

-Liang

I'm an idiot, don't mind me.
Dato Koppla
Spaghetti Militia
#13 - 2013-05-20 09:33:42 UTC
Yeah 4 slot armor tank is minimum I'd go with full t2 modules.
To mare
Advanced Technology
#14 - 2013-05-20 11:20:02 UTC
1 DDA would probably give you better dps than the 4th BCS even with just hobs
Oska Rus
Free Ice Cream People
#15 - 2013-05-20 17:14:41 UTC
On a missile ship youll prolly need target painter.
Atlas Arnst
Brutor Tribe
Minmatar Republic
#16 - 2013-05-20 17:41:16 UTC
Alright I'm back, I've updated the first post with a shield fit, I was also able to get a target painter on there as well.
Liang Nuren
No Salvation
Divine Damnation
#17 - 2013-05-20 17:48:59 UTC  |  Edited by: Liang Nuren
This is what I'd run in your shoes:

Typhoon
6x Cruise II
100mn MWD, Hvy Cap Booster, 3 Painter
LAR, RAH, 2 EANM, 3 BCU
2x Rigor, Flare
4x Bouncer II, 5x Warrior II

If you want to splurge on T2 rigs and faction damage mods, switch out to a BLA II, 2x Flare1 setup.

-Liang

Ed: For a shield fit, you could do something like this:

Typhoon
6x Cruise II
Pith C-Type LSB, 2x Invuln, 2x PWNAGE
4x CN BCU, 2x DDA, DC
BLA II, 2x Flare I
4x Bouncer II, 5x Warrior II

I'm an idiot, don't mind me.
Atlas Arnst
Brutor Tribe
Minmatar Republic
#18 - 2013-05-20 18:03:57 UTC
Liang Nuren wrote:
This is what I'd run in your shoes:

Typhoon
6x Cruise II
100mn MWD, Hvy Cap Booster, 3 Painter
LAR, RAH, 2 EANM, 3 BCU
2x Rigor, Flare
4x Bouncer II, 5x Warrior II

If you want to splurge on T2 rigs and faction damage mods, switch out to a BLA II, 2x Flare1 setup.

-Liang

Ed: For a shield fit, you could do something like this:

Typhoon
6x Cruise II
Pith C-Type LSB, 2x Invuln, 2x PWNAGE
4x CN BCU, 2x DDA, DC
BLA II, 2x Flare I
4x Bouncer II, 5x Warrior II
Hmm I could try something like that as well, I guess at this point I'll just have to switch between two fits and see what I'm most comfortable with, thanks for the help.
Liang Nuren
No Salvation
Divine Damnation
#19 - 2013-05-20 18:05:53 UTC
Try them out on Sisi.

-Liang

I'm an idiot, don't mind me.
Atlas Arnst
Brutor Tribe
Minmatar Republic
#20 - 2013-05-20 18:10:37 UTC
Liang Nuren wrote:
Try them out on Sisi.

-Liang
That's what I'm doing right now. Smile
12Next page