These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Ships & Modules

 
  • Topic is locked indefinitely.
 

Evefit project: pyfa 1.1.14 (Odyssey 1.0)
Author
Previous Topic Next Topic
Sakari Orisi
Doomheim
#61 - 2012-08-09 14:13:01 UTC
Denidil wrote:
Sakari Orisi wrote:
Denidil wrote:
skiff was working for a while.. working on my second fitting i tried double clicking on an item to make it fit.. and it didn't show up.. so i did so again.. nothing.... tried again.. nothing

clicked back to first fit and saw fit.. clicked back to second fit... aaaand broken. restarted pyfa.. still broken on that one fitting


Which item did you try to fit ? I can't fix those without more info


it was either a cap flux coil or a cap power relay IIRC


Both power relay and flux coil fit fine, just tested this on a clean install.

The evefit project Pyfa thread Phobos thread
Denidil
Cascades Mountain Operatives
#62 - 2012-08-09 14:36:47 UTC
Sakari Orisi wrote:
Denidil wrote:
Sakari Orisi wrote:
Denidil wrote:
skiff was working for a while.. working on my second fitting i tried double clicking on an item to make it fit.. and it didn't show up.. so i did so again.. nothing.... tried again.. nothing

clicked back to first fit and saw fit.. clicked back to second fit... aaaand broken. restarted pyfa.. still broken on that one fitting


Which item did you try to fit ? I can't fix those without more info


it was either a cap flux coil or a cap power relay IIRC


Both power relay and flux coil fit fine, just tested this on a clean install.


ok . i might just have to clean install since i had horked with the sqllite database.

Tedium and difficulty are not the same thing, if you don't realize this then STFU about game design.
Vogue
Pandemic Horde Inc.
Pandemic Horde
#63 - 2012-08-09 15:13:24 UTC  |  Edited by: Vogue
Fyi Comodo firewall 5.1 on Windows 7 64 bit flags Pyfa as malware. I installed pyfa-1.1.9-inferno-1.2-win-installer.exe. Though Comodo firewall does not play nice with quite a few other programs from my experience.
Denidil
Cascades Mountain Operatives
#64 - 2012-08-09 15:38:26 UTC
Vogue wrote:
Fyi Comodo firewall 5.1 on Windows 7 64 bit flags Pyfa as malware. I installed pyfa-1.1.9-inferno-1.2-win-installer.exe. Though Comodo firewall does not play nice with quite a few other programs from my experience.



why do you have a third party firewall installed? windows 7 has a perfectly good built in firewall.

Tedium and difficulty are not the same thing, if you don't realize this then STFU about game design.
Luke Eskar
Tin Foil Hat Club
R I O T
#65 - 2012-08-10 06:12:23 UTC
the download link doesnt work for me keeps saying Oops! Page Not Found Sad

.
Sakari Orisi
Doomheim
#66 - 2012-08-10 06:45:28 UTC
Luke Eskar wrote:
the download link doesnt work for me keeps saying Oops! Page Not Found Sad


The Mac dmg one is pending and will be uploaded soon (tm) (hopefully within the day), the other ones should work just fine.

The evefit project Pyfa thread Phobos thread
Alundil
Rolled Out
#67 - 2012-08-10 13:17:42 UTC
Just started trying Pyfa out after using EFT for several years. I like the look and feel of the tool. I think it has some real pluses.

I do have a question though. Is it possible to apply implants to a character versus fittings? This is something that would be very beneficial.

One other comment thus far. I've used the import function to grab several of the fittings from EFT. That has worked well. However when I attempting to grab all of the fittings at once Pyfa seemed to hang and go non-responsive. There was no i/o or read/write activity on the Pyfa process at this point and I had to kill the process. Select 3-4 at a time worked without issue.

Nicely done though.

I'm right behind you
Daneel Trevize
Give my 11percent back
#68 - 2012-08-10 13:24:12 UTC
Sakari Orisi wrote:
Daneel Trevize wrote:
Win7 64bit, it crashes before any GUI appears with:
Quote:
Problem signature:
Problem Event Name: APPCRASH
Application Name: pyfa.exe
Application Version: 0.0.0.0
Application Timestamp: 49180193
Fault Module Name: sqlalchemy.cresultproxy.pyd
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4e9b307d
Exception Code: c0000005
Exception Offset: 000012aa
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

I note I have a pyfa.exe.log text file but it was last updated 23/07/2012, while I use PyFA almost daily and often it exits with a permission error.


To both people getting this, can you try renaming your .pyfa folder in your home dir and see if that fixes it ? (your fits are stored in there, make sure to not remove it!!)
That didn't change the error.

I did find that Win7 doesn't like you naming things .pyfa via the GUI, but is fine with it in the command line. Roll
Rastuasi
Crunchy Crunchy
#69 - 2012-08-10 18:16:02 UTC
Not sure if it's mentioned but when trying to fit a medium core defense operational solidifer, the program bugs out. Fits won't load, you cannot modify a fit once you tried sticking one on.

Using pyfa 1.1.9 git - Inferno 1.2 on linux
Derath Ellecon
University of Caille
Gallente Federation
#70 - 2012-08-10 19:05:08 UTC
Daneel Trevize wrote:
Sakari Orisi wrote:
Daneel Trevize wrote:
Win7 64bit, it crashes before any GUI appears with:
Quote:
Problem signature:
Problem Event Name: APPCRASH
Application Name: pyfa.exe
Application Version: 0.0.0.0
Application Timestamp: 49180193
Fault Module Name: sqlalchemy.cresultproxy.pyd
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4e9b307d
Exception Code: c0000005
Exception Offset: 000012aa
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

I note I have a pyfa.exe.log text file but it was last updated 23/07/2012, while I use PyFA almost daily and often it exits with a permission error.


To both people getting this, can you try renaming your .pyfa folder in your home dir and see if that fixes it ? (your fits are stored in there, make sure to not remove it!!)
That didn't change the error.

I did find that Win7 doesn't like you naming things .pyfa via the GUI, but is fine with it in the command line. Roll



Same. I was in IRC yesterday working with you some. If you need me for any more tests let me know and I can hop in IRC.
Derath Ellecon
University of Caille
Gallente Federation
#71 - 2012-08-10 21:55:09 UTC
Follow up. I tried installing 1.1.9 on a clean (rebuilt last week) windows 7 32 bit machine and I get the same crash error.
Shereza
Center for Advanced Studies
Gallente Federation
#72 - 2012-08-10 22:06:32 UTC  |  Edited by: Shereza
Rastuasi wrote:
Not sure if it's mentioned but when trying to fit a medium core defense operational solidifer, the program bugs out. Fits won't load, you cannot modify a fit once you tried sticking one on.

Using pyfa 1.1.9 git - Inferno 1.2 on linux


Happens with Medium Core Defense Field Extenders too. I've locked out three exhumer fittings, a couple skiff fittings and I think one hulk, with both the T1 and T2 versions of that rig. The rigs, or at least one of the rigs, shows up in a ship info summary, but I don't recall how I pulled it up. Basically it was the window that showed what's affecting the ship and included stacking bonuses.
Sakari Orisi
Doomheim
#73 - 2012-08-10 23:31:18 UTC
Shereza wrote:
Rastuasi wrote:
Not sure if it's mentioned but when trying to fit a medium core defense operational solidifer, the program bugs out. Fits won't load, you cannot modify a fit once you tried sticking one on.

Using pyfa 1.1.9 git - Inferno 1.2 on linux


Happens with Medium Core Defense Field Extenders too. I've locked out three exhumer fittings, a couple skiff fittings and I think one hulk, with both the T1 and T2 versions of that rig. The rigs, or at least one of the rigs, shows up in a ship info summary, but I don't recall how I pulled it up. Basically it was the window that showed what's affecting the ship and included stacking bonuses.


Thanks for that, I'll see to fixing those tomorrow.

For the crashes .. I'll try and check with the ones of you that are on irc what we can do to fix em.

The evefit project Pyfa thread Phobos thread
Shareel Khal'Nar
Eastern Sun
#74 - 2012-08-11 07:25:05 UTC
Shareel Khal'Nar wrote:
Bug:
The Large Core Defense Operational Solidifier I/II has no effect in version 1.18


This bug extends to version 1.19 and you can't load fittings which use an Large Core Defense Operational Solidifier I/II.

If you add an Large Core Defense Operational Solidifier I/II to an existing fit, the rigs doesn't display and the fit becomes unloadable.
Sakari Orisi
Doomheim
#75 - 2012-08-11 09:32:57 UTC  |  Edited by: Sakari Orisi
Shareel Khal'Nar wrote:
Shareel Khal'Nar wrote:
Bug:
The Large Core Defense Operational Solidifier I/II has no effect in version 1.18


This bug extends to version 1.19 and you can't load fittings which use an Large Core Defense Operational Solidifier I/II.

If you add an Large Core Defense Operational Solidifier I/II to an existing fit, the rigs doesn't display and the fit becomes unloadable.


Fixed this one and will make a release soon once I squash the windows crashes.

EDIT: OK, I made a final rerelease of 1.1.9. After the crashes are squashed (this might take a bit). I'll make a 1.1.10 release including everything so everyone can be sure they have all the latest stuff

The evefit project Pyfa thread Phobos thread
Lili Lu
#76 - 2012-08-11 16:37:21 UTC
Sakari Orisi wrote:
EDIT: OK, I made a final rerelease of 1.1.9. After the crashes are squashed (this might take a bit). I'll make a 1.1.10 release including everything so everyone can be sure they have all the latest stuff

Thanks Smile
Abannan
Federal Navy Academy
Gallente Federation
#77 - 2012-08-13 10:34:11 UTC
The website literally never works for me...just says page cannot be found
Sakari Orisi
Doomheim
#78 - 2012-08-13 13:52:45 UTC
Abannan wrote:
The website literally never works for me...just says page cannot be found


Which URL ?

The evefit project Pyfa thread Phobos thread
Abannan
Federal Navy Academy
Gallente Federation
#79 - 2012-08-14 21:29:22 UTC
Sakari Orisi wrote:
Abannan wrote:
The website literally never works for me...just says page cannot be found


Which URL ?


http://evefit.org/Pyfa/Installation

this one
Sakari Orisi
Doomheim
#80 - 2012-08-15 08:08:14 UTC
Abannan wrote:
Sakari Orisi wrote:
Abannan wrote:
The website literally never works for me...just says page cannot be found


Which URL ?


http://evefit.org/Pyfa/Installation

this one

It loads here, also has had many many hits in the past few days so I'm assuming it works for everyone else too

The evefit project Pyfa thread Phobos thread