These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Issues, Workarounds & Localization

 
  • Topic is locked indefinitely.
 

Warp to / Jump problem when insufficient capacitor to complete warp
Author
Previous Topic Next Topic
Iniquita
Perkone
Caldari State
#1 - 2012-02-08 11:02:50 UTC
If you initiate warp using the Jump/Dock option but do not have enough capacitor to complete the warp you will be unable to use the jump/dock command when you come out of the first warp and try to initiate another to get to the destination.
Astrid Stjerna
Sebiestor Tribe
#2 - 2012-02-08 17:29:49 UTC
Iniquita wrote:
If you initiate warp using the Jump/Dock option but do not have enough capacitor to complete the warp you will be unable to use the jump/dock command when you come out of the first warp and try to initiate another to get to the destination.


Are you waiting for your capacitor to recharge before warping again? Initiating warp requires a capacitor charge, so you're probably not going to be able to re-engage the warp drive until you've let your capacitor charge up.

I can't get rid of my darn signature!  Oh, wait....
Iniquita
Perkone
Caldari State
#3 - 2012-02-08 21:40:25 UTC
It doesn't matter, even if you just have a tiny bit of capacitor you should still initiate warp again but the attempting to use the jump/dock option to initiate warp after the initial warp/cap out does not function. The behavior of the jump/dock option is inconsistent when you are unable to reach the destination due to capacitor issues.
Mr Kidd
Center for Advanced Studies
Gallente Federation
#4 - 2012-02-09 03:35:36 UTC
I've noticed this problem as well. The workaround is to get moving, set speed to full for example, then initiate warp again.

Don't ban me, bro!