These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Issues, Workarounds & Localization

 
  • Topic is locked indefinitely.
 

Fitting issue

Author
GoHa RED
Deep Core Mining Inc.
Caldari State
#1 - 2016-10-31 02:15:54 UTC
Hello,

I am flying Daredevil frigate for burner missions. Using "daredevil universal rigs" setup.
So, I have to change fitting very frequently, every fight. Also every fight frig take heat damage and I repair it after each fight (dunno if it relevant).

One day, I got burner missions, went there, accepted, changed fit and undocked. Right after undocking I noticed, that some of my modules are missing in UI. Just like if I did not installed and there are empy spots. Totally no sign of installed modules on UI. Well, I open fitting windows and noticed, that all modules are there, but looks like they all are offline.

That is weird, because offlined modules are still visible, usually.

Ok, I've docked back to station, removed and reinstalled each module. Undocked again and this time it looks fine... right until I start the fight. All modules there, and UI shows that they works, but I feel totaly no effect from these modules. It was those modules that was not showing recently.

I"ve managed to survive the fight (just lucky) return to base, uninstalled all modules, repackaged them all. And next fight it looks to be back to normal.

Day or two later it happens again with the same ship. Once again, I return to base, re-fitted the ship and went to fight. In that fight modules make no effect even though they looks like working ones. And I"ve survived again, Incredible luck, as I came home on little piece of structure.

From that point on, I've been doing re-packaging each module after each fight and it seems helped.

Until today. As usual, I've fitted the ship for serpentis burner and started the fight. I've noticed that effect when modules are there, timers turning but modules make no effect. This time no luck and frig died.

I got new one, but this entire situation is not normal. Those thing are expensive and I've used deadspace moduels for this burner.

I need help.

Windows 7/64, Broadband Comcast Internet. I did tens and tens of those burner missions, it was not just first attempt or something, so It is very clear if something going wrong.
GoHa RED
Deep Core Mining Inc.
Caldari State
#2 - 2016-11-02 02:26:46 UTC  |  Edited by: GoHa RED
Here come screenshot.

first screenshots shows the situation when module present in fitting and seems to be enabled, but the module is missing in ship UI
http://c2n.me/3DWiPsJ

Second screenshot: when this happens, fitting window shows no tool tip for broken module when you hover mouse over it
http://c2n.me/3DWiQkV
notice: it shows small buttons "power" and "info" but no tool tip.

And good module, right next to broken module, it do has a tool tip
http://c2n.me/3DWiSnx

please advise. this keep happening with me.