These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Science & Industry

 
  • Topic is locked indefinitely.
 

My mobile lab in PoS won't do anything
Author
Previous Topic Next Topic
Captian FruitLoop
Captian FruitLoop Corporation
#1 - 2011-10-31 04:00:14 UTC  |  Edited by: Captian FruitLoop
I've just recently put a lab in my pos, but I've tried to research my BPO's, but it won't show any installations or anything. What am I doing wrong here? It has a copy slot, and it won't copy. It has 3 time and material research slots, and it won't do either. I haven't tried inventions, but I doubt it works either.
Tau Cabalander
Retirement Retreat
Working Stiffs
#2 - 2011-10-31 04:09:25 UTC
Is it online? Does it show on Installations? Make sure to select corporate labs in your region.

Do you have the roles to access the lab?
Captian FruitLoop
Captian FruitLoop Corporation
#3 - 2011-10-31 04:11:02 UTC
Tau Cabalander wrote:
Is it online? Does it show on Installations? Make sure to select corporate labs in your region.

Do you have the roles to access the lab?



Anchored, Online, Shows no installations, Corp labs in my region is selected, and I'm the ceo.
Scrapyard Bob
EVE University
Ivy League
#4 - 2011-10-31 04:20:59 UTC
Don't try to fiddle with the access settings on the lab slots other then setting the install fee and per hour fees.

Place the BPO in a corporate hangar in the same system as the POS tower (or take the BPO out to the lab - which is not recommended). In order to use a POS, you must have a corporate hangar in the same system - and you'll need the appropriate role (research manager).

Right-click the BPO in the corp hangar (or use the "corp blueprints" tab in the S&I window), choose the research type of your choice.

Change the scope to search for "current system" or "entire region" and choose "Corp" instead of "Public". Your list of POS lab slots should now show up. If they don't then either the access settings on the lab slots are wrong or you have the filtering options set (all checkboxes should be cleared when picking an installation slot).
Captian FruitLoop
Captian FruitLoop Corporation
#5 - 2011-10-31 05:24:45 UTC
Scrapyard Bob wrote:
Don't try to fiddle with the access settings on the lab slots other then setting the install fee and per hour fees.

Place the BPO in a corporate hangar in the same system as the POS tower (or take the BPO out to the lab - which is not recommended). In order to use a POS, you must have a corporate hangar in the same system - and you'll need the appropriate role (research manager).

Right-click the BPO in the corp hangar (or use the "corp blueprints" tab in the S&I window), choose the research type of your choice.

Change the scope to search for "current system" or "entire region" and choose "Corp" instead of "Public". Your list of POS lab slots should now show up. If they don't then either the access settings on the lab slots are wrong or you have the filtering options set (all checkboxes should be cleared when picking an installation slot).



Thanks very much, I see it now.