These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Issues, Workarounds & Localization

 
  • Topic is locked indefinitely.
 

Probes not remembering size when Analyze clicked
Author
Previous Topic Next Topic
Letesse V
Mellivora Nulla Irrumabo
#1 - 2012-06-02 12:50:02 UTC
this is driving me nuts....:

when mulitple selecting probes, dragging down ALL of them to a lower size, then clicking analyze all but 1 will pop back to the previous larger size. Is this a known issue?

Only happens about 1 in 5 times
ark'turus
VALENCE STORM RECONNAISSANCE
#2 - 2012-06-02 17:50:59 UTC
I've had this problem on one of my two computers so it may be system related. The easiest way to ensure it doesn't happen is to take a look at the probe size in the probe management window. It reads the actual size of the probe as opposed to what the view is telling you. From there you can either size the one probe with a right click or re-size them again using the GUI. I've found that by over dragging the size bubble seems to eliminate or reduce the problem. It's annoying and has slowed me down a few times but it's manageable.
Letesse V
Mellivora Nulla Irrumabo
#3 - 2012-06-02 18:27:05 UTC
brand new system, a week old...!
Anyway I fixed it by remembering to do a directional scan whilst the Analyze scan is running, the change in tabs seems to prevent the weird behavior....not ideal but....

I'll take some screen-shots of the list of probe sizes in the System Scanner tab at odds with whats showing in space, very odd