These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

EVE Information Portal

 
  • Topic is locked indefinitely.
 

EVE Online: Crucible 1.1 Issues

First post
Author
Previous Topic Next Topic
OkarasRule
State War Academy
Caldari State
#41 - 2012-01-24 17:13:34 UTC
id like a way to use the old system as it was much better imo...
Liam Mirren
#42 - 2012-01-24 17:17:03 UTC  |  Edited by: Liam Mirren
Few things I noticed:

- On the Neocom, the blue bar below my avatar is obviously the skillqueue but the bar shows to be half full while i still have more than a full day of training left. I'm going to assume that the plan is (and if not it should be) to visually depict the state of my skillqueue, atm it doesn't.

- why can't I remove the channel icon from the Neocom?

- why must the item and ship hangar icons remain fixed at the bottom left? Why can't I move them around on the Neocom just like all other icons?

- why must I get an annoying icon on the Neocom when I open the ingame browser? i KNOW it's open as I'm looking at it, I don't need the extra icon. It would make more sense to visually show it on the actual browser icon.

Excellence is not a skill, it's an attitude.
CCP Sputnik
C C P
C C P Alliance
#43 - 2012-01-24 17:18:03 UTC
Oxeu wrote:
Tried as you asked, however repair tool now says there are no problems so it doesn't fix anything. (this is running as admin firewall off on vista 32bit)


Could you delete eve.exe manually and try to run the repair tool again?

CCP Sputnik | Software Engineer | Team Undone Unit

My EVElopedia Talk My Broadcast Log
CCP Sputnik
C C P
C C P Alliance
#44 - 2012-01-24 17:20:14 UTC  |  Edited by: CCP Sputnik
Valinar wrote:
CCP Sputnik wrote:

Have you already tried disabling your virus scanner while running the repair tool and running it as administrator?

EDIT: Also please make sure there is definitively no ExeFile.exe running on your PC before doing this.


I checked that ExeFile.exe wasn't running (it wasn't). I disabled my anti-virus. I ran repair.exe as administrator. I started the client.

No help: the error message is still appearing.

The log from repair.exe looks prety much the same as before.


Could you try to delete ExeFile.exe manually and run the repair tool again.

PS. Thanks for hanging in there everybody.

CCP Sputnik | Software Engineer | Team Undone Unit

My EVElopedia Talk My Broadcast Log
Oxeu
Perkone
Caldari State
#45 - 2012-01-24 17:24:12 UTC
CCP Sputnik wrote:
Oxeu wrote:
Tried as you asked, however repair tool now says there are no problems so it doesn't fix anything. (this is running as admin firewall off on vista 32bit)


Could you delete eve.exe manually and try to run the repair tool again?


That has done it, thank you so much all working now.
LittleHorror
School of Applied Knowledge
Caldari State
#46 - 2012-01-24 17:33:50 UTC
Got the same as Oxeu

Dominion splash screen ftw

Thought timetravelling was not possible for me :)
Valinar
Bottom of the Barrel
#47 - 2012-01-24 17:34:20 UTC
CCP Sputnik wrote:
Could you try to delete ExeFile.exe manually and run the repair tool again.


Sorry, that didn't change anything. I repeated the procedure from before (checking exefile wasn't running, disabling AV, etc.); repair.exe detected that ExeFile.exe was missing and downloaded it but I still get R6034 when I start the client.
LittleHorror
School of Applied Knowledge
Caldari State
#48 - 2012-01-24 17:46:32 UTC
LittleHorror wrote:
Got the same as Oxeu

Dominion splash screen ftw

Thought timetravelling was not possible for me :)


Well lucky for me, I have another client running ok in a seperated directory, going to copy the files.
Syratus
BioHazard International
#49 - 2012-01-24 17:49:00 UTC  |  Edited by: Syratus
Re: Decimal separators

While I could see how EVE using system defaults may be a good idea in some ways, I see two problems. One a problem, one a real bug:

a) Problem of course is just that people using an English client can't decide now to use the English notation. Many ppl pick the English client to be "compatible" to most other players. Maybe make it optional? As you made the language choice optional in the first place?

b) You used to be able to copy&paste numbers in market orders (setting up new ones, modifying current ones) - but it doesn't work now when using any value that has fractions of ISK. E.g., right now the client forces me to use the "comma" as fractions-of-ISK separator, and I can copy amounts from market orders to the clipboard. But I can not paste them back - probably because something checks for "make sure that only valid characters get pasted in here". Please fix that one, thanks!

Win7 Pro x64 German, English language EVE client.
Blue Harrier
#50 - 2012-01-24 18:07:54 UTC
Seleia O'Sinnor wrote:
After hittin finalize for a recustomization of a character's photo the client froze in that last view, while the character was still moving, I could not click on any control. The menu was showing up after hittin escape. The new picture was saved though after restarting the client.

Had this happen while testing on SiSi, asked if anyone else had the problem in the Test Server forum but no-one answered so thought it was just a glitch at my end.

"You wait - time passes, Thorin sits down and starts singing about gold." from The Hobbit on ZX Spectrum 1982.
Mnengli Noiliffe
Doomheim
#51 - 2012-01-24 18:16:20 UTC
here are the issues with this update I spotted so far -

When setting destination from the Industry window - Jobs, Installations tabs - the destination is set to the solar system rather than to the station selected as it should.

The option 'Merge Items, Ships with Station panel' now does not remove the Items, Ships buttons from the Neocon like it used to.
JudgeBob
Sebiestor Tribe
Minmatar Republic
#52 - 2012-01-24 18:26:08 UTC  |  Edited by: JudgeBob
When I double-click on a station container to open it, no window opens. Instead a blue "i" icon appears on the neocom where the container appears on a menu. When I open the container from there, the window opens but is empty. No titlebar text, no items contents at all, just minimize/close icons.

I can't see or manipulate ANY items I have stored in station containers, and all my stuff is sorted into containers so I can't access ANY of my stuff. Most unfun.

Right-clicking on the container and selecting configure causes the client to crash.

No errors when patching, no other problems found yet.

Edit, after changing chars and restarting the client the problem SEEMS to no longer happen, so unless I'm not the only one or it comes back... nevermind. :)
Bent Barrel
#53 - 2012-01-24 18:31:26 UTC  |  Edited by: Bent Barrel
Linux/Wine here, so take with a grain of salt unless other people confirm.

1st, the compact chat member list is great, also the new neocom LOOKS good, oh also the drone window does not vanish while launching drones.

Now the bad things:

1. Neocom icons - why do all things have that generic blue "i" icon when minimized ? I had scanner and fps monitor open. Had to wait for tooltip to see which is which. NOT GOOD

2. Autohiding neocom pushes windows (even pined ones) away as it unhides. the old neocom slid UNDER any window in its path. Also it snaped the window (chat in my case) to itself while moving. had to reselect the don't snap windows option.

3. Cannot move probes in the solar system map. FOr some reason I have to click into chat and then onto probes for the client to allow me to move them. And once I finish the moving, I have to do it again since they are not recognized as a movable object.
okcerg
Deafside
#54 - 2012-01-24 18:38:22 UTC
An issue with API and the new MemberTrackingExtended
When adding the "extended=1" parameter to the request (corp director API key) I get this message:
Illegal page request! Please verify the access granted by the key you are using!

On the API page of eve-o website there isn't the 2 new masks, only the old one "MemberTracking"
Aineko Macx
#55 - 2012-01-24 18:43:29 UTC
I was experiencing severe FPS drop with the update. For instance, just opening an item hangar with 50 items in it would cut the fps in half. Same for just sitting in a POS. What apparently fixed this was updating from ATI Catalyst 11.11 to 11.12. That's for a Radeon HD6950.

iveeCore 3.0: The PHP engine for industrial activities and CREST library
Deheler
Muggers Inc.
#56 - 2012-01-24 18:43:33 UTC
Syratus wrote:
Re: Decimal separators

While I could see how EVE using system defaults may be a good idea in some ways, I see two problems. One a problem, one a real bug:

a) Problem of course is just that people using an English client can't decide now to use the English notation. Many ppl pick the English client to be "compatible" to most other players. Maybe make it optional? As you made the language choice optional in the first place?

b) You used to be able to copy&paste numbers in market orders (setting up new ones, modifying current ones) - but it doesn't work now when using any value that has fractions of ISK. E.g., right now the client forces me to use the "comma" as fractions-of-ISK separator, and I can copy amounts from market orders to the clipboard. But I can not paste them back - probably because something checks for "make sure that only valid characters get pasted in here". Please fix that one, thanks!

It's worse than just being forced to use the comma. Since the patch the comma ',' button is the only button accepted as separator between Isk and Isk-cents, but it shows as a full stop period '.'
The full stop period button on the num-pad doesn't work at all, which is quite annoying when working the market. So for me, although the rest of the patch is great and working as it should, this is a loss of functionality I can do without.


Standard 101/102 keyboard on AMD athlon II X4 640 3,62GHz
WinXP 32bit SP3 English version set to use the Dutch numerical notation system.
Pilot Dima
Big Johnson's
#57 - 2012-01-24 18:46:13 UTC
Having an issue with saving locations to corp bookmarks. When saving locations straight to folders in corporation locations, the bookmarks save fine except that they seem to disappear after a bit of time. Tried saving to my "personal locations" first and then saving the same location to "corporation locations"--same issue. Tried dragging bookmarks from "personal locations" to "corporation locations" folders--seems to work, bookmarks stay put. Also tried saving a location straight to "corporation locations" but not in a folder, and that also seems to work fine. So, appears to be an issue with corporation location folders. Personal folders are working fine.
Hagbard23Celine
The Scope
Gallente Federation
#58 - 2012-01-24 18:46:24 UTC
T2 Hic point is still bugged, i wrote a bugreport ID 126071
Bronicka Dimaloun
The DROP SQUAD inc
#59 - 2012-01-24 18:54:32 UTC
Problem:
Is there a way to minimize Local and other windows to the bottom of the screen again so I can see when they blink instead of having to click the Neo-Com then the chat channels no the side
JudgeBob
Sebiestor Tribe
Minmatar Republic
#60 - 2012-01-24 19:17:22 UTC
The clock on the neocom used to show the date, how do I turn that back on?