These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Science & Industry

 
  • Topic is locked indefinitely.
 

EVE IPH Industry Calculator v3.3
Author
Previous Topic Next Topic
Lenar Silenius
Dark Star Munitions
#161 - 2016-06-02 21:18:42 UTC
Cwittofur Cesaille wrote:


I probably should build a Citadel to test this stuff out! I haven't had an opportunity to put stuff in a Citadel to test out how the API presents the data. I'll see what I can do.

The blueprints in Cargo Containers work; I have all of mine organized by type in containers in a station and they show up properly.


AFAIK, the API does not present data about citadels at all. Neocom (the iOS app) displays nothing where it usually shows a character's current location, and assets in citadels are not included in the Assets window.
Ranamar
Nobody in Local
Deepwater Hooligans
#162 - 2016-06-03 00:15:23 UTC
Lenar Silenius wrote:
Cwittofur Cesaille wrote:


I probably should build a Citadel to test this stuff out! I haven't had an opportunity to put stuff in a Citadel to test out how the API presents the data. I'll see what I can do.

The blueprints in Cargo Containers work; I have all of mine organized by type in containers in a station and they show up properly.


AFAIK, the API does not present data about citadels at all. Neocom (the iOS app) displays nothing where it usually shows a character's current location, and assets in citadels are not included in the Assets window.


That's awkward. Thanks for the information.
Lee Spicer
Signal Cartel
EvE-Scout Enclave
#163 - 2016-06-04 23:21:58 UTC
Getting this error when trying to install the software.

The cabinet file 'disk1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with the package.

When I click retry it just flashes and pops up the same box.


When I click IGNORE, i get a FDI server error. Neither Retry or Ignore work on this error, so I have to cancel the install



I am on Windows 10 if it makes any beans.

Good Luck
Zifrian
The Frog Pond
Ribbit.
#164 - 2016-06-05 02:13:30 UTC
Lee Spicer wrote:
Getting this error when trying to install the software.

The cabinet file 'disk1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with the package.

When I click retry it just flashes and pops up the same box.


When I click IGNORE, i get a FDI server error. Neither Retry or Ignore work on this error, so I have to cancel the install



I am on Windows 10 if it makes any beans.

Good Luck

Try using the binary files in a zip format and try again. I'll republish the installer file.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Zifrian
The Frog Pond
Ribbit.
#165 - 2016-06-05 02:38:00 UTC
Build 3.3.5999.39753

* Fixed an issue where facilities were not correctly applying usage (and reporting as zero)
* Fixed an issue where POS arrays on the Manufacturing Tab Base Facility were disabled without a way to enable them.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Lee Spicer
Signal Cartel
EvE-Scout Enclave
#166 - 2016-06-05 04:34:56 UTC
Quote:
Try using the binary files in a zip format and try again. I'll republish the installer file.


That works so far, will advise if i have problems.
MyShop
Fasters Than Chuck Norris
#167 - 2016-06-05 11:17:41 UTC
Since some days ago, I can't update my blueprints. At least, manually.

When select a BP in "Blueprints" tab, change ME or PE and press "Save BP", changes are not saved. If I select a different BP and go back to the first one (not through history, just searching it again in the search box), changes I made are gone.

I also tested to update BP from "Manage Blueprints" window. Same result.

I'm using only latest EVE IPH version. Binaries version.

Thank you!
Zifrian
The Frog Pond
Ribbit.
#168 - 2016-06-05 22:49:05 UTC
MyShop wrote:
Since some days ago, I can't update my blueprints. At least, manually.

When select a BP in "Blueprints" tab, change ME or PE and press "Save BP", changes are not saved. If I select a different BP and go back to the first one (not through history, just searching it again in the search box), changes I made are gone.

I also tested to update BP from "Manage Blueprints" window. Same result.

I'm using only latest EVE IPH version. Binaries version.

Thank you!

Do you have an API loaded or are you using the dummy account?

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Zifrian
The Frog Pond
Ribbit.
#169 - 2016-06-05 22:50:39 UTC
Build 3.3.6000.33711

* Fixed an issue where Component and T3 Production facilities would not allow changing Cap Components or T3 Destroyer facilities if the systems were the same for Components or T3 ships.
* Updated the list box drop down on the BP tab to allow mouse clicks, hover select, and other improvements.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
MyShop
Fasters Than Chuck Norris
#170 - 2016-06-05 22:58:47 UTC  |  Edited by: MyShop
Zifrian wrote:
MyShop wrote:
Since some days ago, I can't update my blueprints. At least, manually.

When select a BP in "Blueprints" tab, change ME or PE and press "Save BP", changes are not saved. If I select a different BP and go back to the first one (not through history, just searching it again in the search box), changes I made are gone.

I also tested to update BP from "Manage Blueprints" window. Same result.

I'm using only latest EVE IPH version. Binaries version.

Thank you!

Do you have an API loaded or are you using the dummy account?



API

P.S.: thank you for answering!
Zifrian
The Frog Pond
Ribbit.
#171 - 2016-06-05 23:10:42 UTC
MyShop wrote:
Zifrian wrote:
MyShop wrote:
Since some days ago, I can't update my blueprints. At least, manually.

When select a BP in "Blueprints" tab, change ME or PE and press "Save BP", changes are not saved. If I select a different BP and go back to the first one (not through history, just searching it again in the search box), changes I made are gone.

I also tested to update BP from "Manage Blueprints" window. Same result.

I'm using only latest EVE IPH version. Binaries version.

Thank you!

Do you have an API loaded or are you using the dummy account?



API

P.S.: thank you for answering!

OK I'm not noticing an issue. What item are you saving? Do you have corp bps saved? Maybe send me the api you have and I'll see if there is an issue with it.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Tiberius Zol
Moira.
#172 - 2016-06-06 08:48:58 UTC
I get a crash whenever i set the compressed ore box to checked (on the blueprints tab):

6/6/2016 10:13:12 AM, System.OverflowException: Die arithmetische Operation hat einen Überlauf verursacht.
bei EVE_Isk_per_Hour.frmMain.CalculateCompressedOres(List`1 bpMaterialList)
bei EVE_Isk_per_Hour.frmMain.UpdateBPGrids(Int64 BPID, Int32 BPTech, Boolean NewBPSelection, Int32 BPGroupID, Int32 BPCategoryID, Boolean UpdateTeamBonusLabel)
bei EVE_Isk_per_Hour.frmMain.RefreshBP(Boolean IgnoreFocus)
bei EVE_Isk_per_Hour.frmMain.btnRefreshBP_Click(Object sender, EventArgs e)
bei System.Windows.Forms.Control.OnClick(EventArgs e)
bei System.Windows.Forms.Button.OnClick(EventArgs e)
bei System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
bei System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
bei System.Windows.Forms.Control.WndProc(Message& m)
bei System.Windows.Forms.ButtonBase.WndProc(Message& m)
bei System.Windows.Forms.Button.WndProc(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

Mr. Tibbers on twitter: @Mr_Tibbers

Mr. Tibbers Blog: www.eve-versum.de
Cwittofur Cesaille
Sniggerdly
Pandemic Legion
#173 - 2016-06-06 14:28:41 UTC
Tiberius Zol wrote:
I get a crash whenever i set the compressed ore box to checked (on the blueprints tab):

6/6/2016 10:13:12 AM, System.OverflowException: Die arithmetische Operation hat einen Überlauf verursacht.
bei EVE_Isk_per_Hour.frmMain.CalculateCompressedOres(List`1 bpMaterialList)
bei EVE_Isk_per_Hour.frmMain.UpdateBPGrids(Int64 BPID, Int32 BPTech, Boolean NewBPSelection, Int32 BPGroupID, Int32 BPCategoryID, Boolean UpdateTeamBonusLabel)
bei EVE_Isk_per_Hour.frmMain.RefreshBP(Boolean IgnoreFocus)
bei EVE_Isk_per_Hour.frmMain.btnRefreshBP_Click(Object sender, EventArgs e)
bei System.Windows.Forms.Control.OnClick(EventArgs e)
bei System.Windows.Forms.Button.OnClick(EventArgs e)
bei System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
bei System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
bei System.Windows.Forms.Control.WndProc(Message& m)
bei System.Windows.Forms.ButtonBase.WndProc(Message& m)
bei System.Windows.Forms.Button.WndProc(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


This is a database corruption issue; unfortunately you'll need to download the clean database and use that instead.

EVE IPH Database

Once you download this, copy it into your EVE IPH installation folder. You will need to re-apply your API keys as this resets everything. This is equivalent to a soft re-install.
MyShop
Fasters Than Chuck Norris
#174 - 2016-06-06 15:03:39 UTC
Zifrian wrote:
MyShop wrote:
Zifrian wrote:
MyShop wrote:
Since some days ago, I can't update my blueprints. At least, manually.

When select a BP in "Blueprints" tab, change ME or PE and press "Save BP", changes are not saved. If I select a different BP and go back to the first one (not through history, just searching it again in the search box), changes I made are gone.

I also tested to update BP from "Manage Blueprints" window. Same result.

I'm using only latest EVE IPH version. Binaries version.

Thank you!

Do you have an API loaded or are you using the dummy account?



API

P.S.: thank you for answering!

OK I'm not noticing an issue. What item are you saving? Do you have corp bps saved? Maybe send me the api you have and I'll see if there is an issue with it.


It happens with all BPO I tested (astrahus, omen, caracal, raven, dominix, etc). All BPOs are in characters' hangar.

I have tested it with new API key with another account. Same result.

But here some new info: only updating TE is bugged, ME is working as expected!


If you need an API key, I can give you one, but it happens with all accounts. The access mask i'm using is the one provided by IPH (589962).


Thank you!
Tiberius Zol
Moira.
#175 - 2016-06-06 19:06:32 UTC
Cwittofur Cesaille wrote:


This is a database corruption issue; unfortunately you'll need to download the clean database and use that instead.

EVE IPH Database

Once you download this, copy it into your EVE IPH installation folder. You will need to re-apply your API keys as this resets everything. This is equivalent to a soft re-install.


Working.. thanks man. :)

Mr. Tibbers on twitter: @Mr_Tibbers

Mr. Tibbers Blog: www.eve-versum.de
Zifrian
The Frog Pond
Ribbit.
#176 - 2016-06-06 23:31:00 UTC
Tiberius Zol wrote:
I get a crash whenever i set the compressed ore box to checked (on the blueprints tab):

6/6/2016 10:13:12 AM, System.OverflowException: Die arithmetische Operation hat einen Überlauf verursacht.
bei EVE_Isk_per_Hour.frmMain.CalculateCompressedOres(List`1 bpMaterialList)
bei EVE_Isk_per_Hour.frmMain.UpdateBPGrids(Int64 BPID, Int32 BPTech, Boolean NewBPSelection, Int32 BPGroupID, Int32 BPCategoryID, Boolean UpdateTeamBonusLabel)
bei EVE_Isk_per_Hour.frmMain.RefreshBP(Boolean IgnoreFocus)
bei EVE_Isk_per_Hour.frmMain.btnRefreshBP_Click(Object sender, EventArgs e)
bei System.Windows.Forms.Control.OnClick(EventArgs e)
bei System.Windows.Forms.Button.OnClick(EventArgs e)
bei System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
bei System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
bei System.Windows.Forms.Control.WndProc(Message& m)
bei System.Windows.Forms.ButtonBase.WndProc(Message& m)
bei System.Windows.Forms.Button.WndProc(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

This issue has been corrected for anyone else that was getting it. Get the latest update and let us know how it runs.

Thanks

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Zifrian
The Frog Pond
Ribbit.
#177 - 2016-06-06 23:36:29 UTC
Build 3.3.6001.35157

* Fixed an issue where the compressed ore check box would crash the program when selected.
* The Capital Remote Capacitor Transmitter II Blueprint has been added to the program.
* Fixed some other stuff I won't bore you about.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Pilor Deka
Doomheim
#178 - 2016-06-08 09:04:24 UTC  |  Edited by: Pilor Deka
Hello,

first of all thank you for this amazing Program.

Im using it for about 3 Days now, and it is very intuitive and easy to handle.
But i have one question about the T2 Inventions Costs.

Lets say i make 50 Inventions of a T2 Item.
per Run i have 2 Specific Datacores, a Decryptor and a chance of 59%
Thats ~ 60 millions in total for all that Stuff, but the Program only shows ~27 millions because it only shows the Cost for the least amount needed because the Inventionchance is at 59%. So 23 Runs in total.
That wouldnt be a Problem, but the other ~ 30 Millions that i spend on the Items for the Runs dont show up in the Total Component Cost or the final Profit.

Am i missing something here, or do i overcomplicating it?
maybe there is the just no other way to display it?

Thank you

EDIT:

Ok theres a simple solution for this problem it seems. What i do now is to add all the Materials and Components that i need into the shoppinglist and edit the Value myself.
Now it shows me the total cost of all Items, depending on how many runs i want.

And what i forgot is the chance to get more items through the Decryptors. I use Parity Decryptor for my Inventions and if im lucky i get from 10 Inventions 5 BPCs with each 4 Runs on it. But the Programm only counts the needed Minimum of 3 successful runs.
So at the end thats even more profit.

I hope thats right and im not doing stupid ****, but i checked it a few times and it seems ok.
Sry my english is not the best, i hope you guys even unterstand what i am trying to tell ^^

Anyway, thank you again and have a nice day.
Solos
Lugandon
#179 - 2016-06-11 20:43:21 UTC
Hello what means this data in iph?

TAXES and FEES?

How it get it?

For example:

http://i.imgur.com/8wiplSL.png

i see that taxes for this job is

http://c2n.me/3z6BnhE.png

but IPH think that it 13kk
Fate Nexus
Tribal Liberation Force
Minmatar Republic
#180 - 2016-06-12 07:49:31 UTC
CREST API still not work.
Tonns of errors of api reading when app started, cant update from app (need download manually) outposts not shows and more and more....
Its make me sad