These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Science & Industry

 
  • Topic is locked indefinitely.
 

EVE IPH Industry Calculator Version 3.3 - Now with Live Market data!

First post
Author
Previous Topic Next Topic
n0rman
Brave Newbies Inc.
Brave Collective
#2481 - 2016-02-04 01:06:24 UTC
Love the new changes! One question though. The CREST market downloads don't seem to provide percentile prices. If you select a percentile price in the Update Prices tab, it appears to chose the min sell or max buy instead. Is this intentional?
Limp Biscuit
University of Caille
Gallente Federation
#2482 - 2016-02-04 20:45:11 UTC  |  Edited by: Limp Biscuit
Thanks for the great program that you've made. There's so many wonderful features available, but I have one request. Rather than buying minerals outright, I use IPH to calculate my requirements, then utilize another external website to calculate the compressed ore that I need to purchase. Of course, this is strictly dependent upon the requirements of the build, but I can easily figure out if I would rather purchase Compressed Veldspar or Compressed Dense Veldspar (as an example) based upon yield and current market price. I can make an educated decision on what's more cost-effective for me at that time.

Would it be possible to integrate this functionality?

Bug issues/update issues

Previously, I had prior version to the newest release installed, and got the prompt for the update. When I attempted to update, I receive notification t"There was an error in the update. Program not updated. Download Corrupted."

I downloaded the file again from github, and attempted installation to no avail. I uninstalled, and re-installed the program, and received the same error message. I downloaded the binary files, and replaced them in the correct folder. When I restarted the program, I received the same notification that there was an update, and the same error message. I cancelled the update, and the program started as normal. When I go to the About tab, it shows version 3.2.5874.14059, yet when I view the Patch Notes, they're dated 1/30/16 for version 3.2.5873.19500.

I assume that I am running the correct version, and the version listed in the About tab was just an oversight, since the patch notes are current.
Gisele Serebriakova
Norman's Meat Market
#2483 - 2016-02-05 14:01:14 UTC
The program is outputting an incorrect production time for Medium Low Friction Nozzle Joints. Since every other BPO I own appears to be correct I'm guessing it's something wrong with the my local databases info. How to fix?
Zifrian
The Frog Pond
Ribbit.
#2484 - 2016-02-06 01:55:40 UTC
n0rman wrote:
Love the new changes! One question though. The CREST market downloads don't seem to provide percentile prices. If you select a percentile price in the Update Prices tab, it appears to chose the min sell or max buy instead. Is this intentional?

I have to manually calculate the percentile for CREST prices and I'm not sure it's the same definition that others use? I think EVE Central uses something different than the top or bottom 5%. I basically find the 95% mark up or down depending and that's the percentile price. I'd appreciate input on if this is what people are expecting because this is what I think of when I think percentiles (and the accepted definition).
Limp Biscuit wrote:
Thanks for the great program that you've made. There's so many wonderful features available, but I have one request. Rather than buying minerals outright, I use IPH to calculate my requirements, then utilize another external website to calculate the compressed ore that I need to purchase. Of course, this is strictly dependent upon the requirements of the build, but I can easily figure out if I would rather purchase Compressed Veldspar or Compressed Dense Veldspar (as an example) based upon yield and current market price. I can make an educated decision on what's more cost-effective for me at that time.

Would it be possible to integrate this functionality?

Bug issues/update issues

Previously, I had prior version to the newest release installed, and got the prompt for the update. When I attempted to update, I receive notification t"There was an error in the update. Program not updated. Download Corrupted."

I downloaded the file again from github, and attempted installation to no avail. I uninstalled, and re-installed the program, and received the same error message. I downloaded the binary files, and replaced them in the correct folder. When I restarted the program, I received the same notification that there was an update, and the same error message. I cancelled the update, and the program started as normal. When I go to the About tab, it shows version 3.2.5874.14059, yet when I view the Patch Notes, they're dated 1/30/16 for version 3.2.5873.19500.

I assume that I am running the correct version, and the version listed in the About tab was just an oversight, since the patch notes are current.

Minerals to ore is something I'm working on for 3.3

Hmm, not sure but the version number you have is right. I just haven't updated the patch notes apparently. Sometimes you'll get a bad download for some reason but it shouldn't be a long standing issue. Does your version say testing at the top?
Gisele Serebriakova wrote:
The program is outputting an incorrect production time for Medium Low Friction Nozzle Joints. Since every other BPO I own appears to be correct I'm guessing it's something wrong with the my local databases info. How to fix?

Send me a screen of what you are seeing and what you expect. I just checked my bp and not seeing an issue. How many runs as well. Thanks

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
d4shing
Bear Stearns Co.
#2485 - 2016-02-07 04:45:47 UTC
Awesome tool!

Couple questions/comments:

Why is the SVR different for the various Compared/Price Comparison options? Seems like, say, an Armor Explosive Hardener II should have the same SVR whether you build/buy, components, or raw material, no?

Also, when you export to a CSV, it seems like the "Total Items Sold" category exports the # with the commas still in there -- i.e. if the total items sold is 2,345, then that's what it puts in the CSV (instead of 2345 with no comma) and you get one cell with a 2 in it and one with 345 in it when you import the CSV into Excel.

Anyways, I had like a whole spreadsheet that I used to use for industry that I spent a ton of time updating with prices manually (and whenever the blueprint specs changed). Nice to see I don't need it anymore!
Da Apprentice
Retirement Retreat
Working Stiffs
#2486 - 2016-02-07 07:42:35 UTC
Morning,

Love the product been using it for years... Today I updated the new updates and now having issues with multiple runs.

Example:
1 Small Focused Beam Laser Raw Mat Cost (10/20) is 366,604.52
100 runs is 39,374,970 (30k Increase per gun)
1000 runs is 763,841,817 (almost double the actual build cost & Materials)

Basically the higher the runs its doubling and tripling what you actually need, same goes for a few other products.
Zifrian
The Frog Pond
Ribbit.
#2487 - 2016-02-07 14:47:54 UTC
d4shing wrote:
Awesome tool!

Couple questions/comments:

Why is the SVR different for the various Compared/Price Comparison options? Seems like, say, an Armor Explosive Hardener II should have the same SVR whether you build/buy, components, or raw material, no?

Also, when you export to a CSV, it seems like the "Total Items Sold" category exports the # with the commas still in there -- i.e. if the total items sold is 2,345, then that's what it puts in the CSV (instead of 2345 with no comma) and you get one cell with a 2 in it and one with 345 in it when you import the CSV into Excel.

Anyways, I had like a whole spreadsheet that I used to use for industry that I spent a ton of time updating with prices manually (and whenever the blueprint specs changed). Nice to see I don't need it anymore!

The SVR will change because it uses time to build as part of the calculation. So you could build/buy something faster than raw materials. It's the total amount of stuff sold divided by the amount of stuff you can make in the time period (as selected in settings). If you make a lot quickly and it doesn't sell that fast, then you would have a lower SVR.

Thanks for the CSV note. I'll patch that today.
Da Apprentice wrote:
Morning,

Love the product been using it for years... Today I updated the new updates and now having issues with multiple runs.

Example:
1 Small Focused Beam Laser Raw Mat Cost (10/20) is 366,604.52
100 runs is 39,374,970 (30k Increase per gun)
1000 runs is 763,841,817 (almost double the actual build cost & Materials)

Basically the higher the runs its doubling and tripling what you actually need, same goes for a few other products.

Nice catch and thanks for pointing it out. I looked into it and the minerals aren't being properly set, the other mats are fine. I'll see if I can get this fixed today.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Gisele Serebriakova
Norman's Meat Market
#2488 - 2016-02-07 15:25:37 UTC
Zifrian wrote:

Send me a screen...


Sent
minumin
Corellian Trading Corporation
#2489 - 2016-02-08 14:17:47 UTC  |  Edited by: minumin
there is a small error with 2 of the command destroyers, they are marked as size limit : L in the 1st tab - Blueprints and also in manufacturing list tab
Magus and Stork
Ilienna
Royal Amarr Institute
Amarr Empire
#2490 - 2016-02-08 17:54:38 UTC
Love the program, been using it for a while. But recently (2 to 3 weeks back), I haven't been unable to open saved shopping lists.
The error message I get when trying to open shopping lists are:

"Cannot read file from disk - Error: No current row"

"Cannot read file from disk - Error: Conversion from string "None" to type 'Boolean' is not valid".

It doesn't matter if I create a shopping list now and try to load it, it will still give me an error. The first error I get with newly created shopping lists and the second error I get with shopping lists that I created a while back.
Da Apprentice
Retirement Retreat
Working Stiffs
#2491 - 2016-02-10 12:27:14 UTC
Any luck with the wrong build numbers for multiple runs fix?
Zifrian
The Frog Pond
Ribbit.
#2492 - 2016-02-11 02:31:06 UTC
Da Apprentice wrote:
Any luck with the wrong build numbers for multiple runs fix?

I just put up a quick patch that should fix this. Let me know if you still see issues.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Sinclair Estraella
Caldari Provisions
Caldari State
#2493 - 2016-02-11 13:20:45 UTC  |  Edited by: Sinclair Estraella
- deleted - problem solved
SpaceMonkeySupreme
The Scope
Gallente Federation
#2494 - 2016-02-11 17:43:59 UTC
Getting an error when I try to install - "The cabinet file disk1.cab required for this installation is corrupt and cannot be used."

If I ignore it I also get an FDI server error. Are these known issues or just a bad download from my end?
Zifrian
The Frog Pond
Ribbit.
#2495 - 2016-02-11 18:45:28 UTC
SpaceMonkeySupreme wrote:
Getting an error when I try to install - "The cabinet file disk1.cab required for this installation is corrupt and cannot be used."

If I ignore it I also get an FDI server error. Are these known issues or just a bad download from my end?

Sounds like a bad download. Try again or use the binaries download and let me know if it still hangs.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Darius Starfire
Center for Advanced Studies
Gallente Federation
#2496 - 2016-02-12 08:29:37 UTC  |  Edited by: Darius Starfire
For the warp scrambler II blueprint under blueprints:

when you change the total run number the RAM electronics number isn't correct.

Thanks for doing what you do!

Edit:

Actually, it isn't working for another item I see either. When you put 1 run it is fine. However when you put in quantities over 100 it seems to be off by a factor of 10.
Da Apprentice
Retirement Retreat
Working Stiffs
#2497 - 2016-02-12 15:43:35 UTC
Zifrian wrote:
Da Apprentice wrote:
Any luck with the wrong build numbers for multiple runs fix?

I just put up a quick patch that should fix this. Let me know if you still see issues.



Seems to work again, thanks!
Zifrian
The Frog Pond
Ribbit.
#2498 - 2016-02-12 21:59:17 UTC
Darius Starfire wrote:
For the warp scrambler II blueprint under blueprints:

when you change the total run number the RAM electronics number isn't correct.

Thanks for doing what you do!

Edit:

Actually, it isn't working for another item I see either. When you put 1 run it is fine. However when you put in quantities over 100 it seems to be off by a factor of 10.

Can you send me a couple of examples? I'm having some issues with the RAMs and not sure where the problem is.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Tear Anasarsy
Reverse Engineering LTD
#2499 - 2016-02-13 00:16:15 UTC
Yay just updated and now my Blueprints work!
I can see what I own from corp hanger now, now to start collecting all the missing ones!
Mirichan
Royal Amarr Institute
Amarr Empire
#2500 - 2016-02-14 08:10:02 UTC
hi

first i love your tool
the update is very nice

only problem i have is that CCP Data price update doesnt work any more
i was able to update a few times after updating to the latest version
now it starts updating but it never finish the job.

progress bar is 100% green and stay that way ....yes i let it run all night to see if it would finish the job

windows 7 sp 1