These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Science & Industry

 
  • Topic is locked indefinitely.
 

EVE IPH Industry Calculator Version 3.3 - Now with Live Market data!

First post
Author
Previous Topic Next Topic
Adalind Olaris
Olaris Enterprises
#1701 - 2014-12-25 02:17:37 UTC
Not exactly sure what is causing it, I have went and deleted all my corporate own blueprints and favorites and it still does it. I was gonna delete everything and re-install and see if that fixes it.
Oxide Ammar
#1702 - 2014-12-25 07:11:33 UTC
Zif you remember I requested an option long time ago of adding a special edition ships check box in Blueprint type under manufacturing list tab. Studying the market and the best profitable blueprints it always list the special edition ships as the most profitable ships to manufacture. It would be good to have check box to off these ships from list while it's calculating.

Lady Areola Fappington:  Solo PVP isn't dead!  You just need to make sure you have your booster, remote rep, cyno, and emergency Falcon alts logged in and ready before you do any solo PVPing.
Chrom Saber
Heir of the New Eden
#1703 - 2014-12-25 11:06:19 UTC
This could be just me being a noob but is the material values for Amarr Control Tower Small wrong in IPH?

IPH Says that for example manufacturing one Tower would eat 8 units of Integrity Response Drones. However when I go to a station and begin installing the job it takes 9 of those for 1 tower. Are the numbers off or is the 10% station tax added to required materials instead of to the installing cost? (So far I've only manufactured stuff at a pos instead of a station so not exactly sure about this.)

Does IPH calculate the 10% station tax into all the prices or does it assume that I use a pos where this tax does not exist? If it assumes that I always/never use a pos is it possible to tell it that I use a station/pos for some items?
Lilith Amon'kira
Pator Tech School
Minmatar Republic
#1704 - 2014-12-25 23:36:58 UTC  |  Edited by: Lilith Amon'kira
Zifrian wrote:
Matriarch Alestia wrote:
Hey.. I downloaded the latest binaries from the SF website. I ran the program and it prompted me for an update. I then ran the update but when the program starts after the update its stuck on "Updating Industry Teams..." part on the splash screen. I tried manually starting the program after killing it but same issue. Reinstalling does not help either. :(

EDIT: Now it shows up an error that the update file cannot be DL'd and is stuck on "Updating Industry Systems cost Indexes".. lol

Hmm, maybe they killed the Team CREST update after they stopped updating teams. I'll look into that. The Systems cost indexes takes a bit to do. Roughly 30-45 seconds. Just give it a few and it'll finish. Let me know if it doesn't.


Okay it takes ages to start up everytime haha but it starts up finally. Now the issue I am having is I cannot select any system apart from Jita. And then I click anything on there the station is gone. It says select station blah blah and there is nothing to select from lol

EDIT: I am an alt btw :P
Nicola Romanoff
Phoenix Connection
Lack of Judgement.
#1705 - 2014-12-26 09:57:44 UTC
When I download this and run it, the program runs updates, then my anti virus says there is a threat called SONAR.Heuristic.130
Elena Thiesant
The Scope
Gallente Federation
#1706 - 2014-12-26 10:03:45 UTC
Use a decent antivirus :-) Norton (I think), Symantec & a couple others are very prone to claiming that in a whole pile of things.

Quote:
SONAR.Heuristic.130 is a heuristic detection for suspicious processes based on certain attributes.

In other words, not a detection, but some catch-all for some suspicious behaviour. Considering that I've seen people saying Symantic flags EVEMon and EFT, I suspect it's got to do with the API calls they do. Maybe it finds caling out to APIs on startup suspicious
Elena Thiesant
The Scope
Gallente Federation
#1707 - 2014-12-26 10:05:39 UTC
Chrom Saber wrote:
Are the numbers off or is the 10% station tax added to required materials instead of to the installing cost?


The tax is a 10% tax on the install cost (ISK). It's not in materials

Are you perhaps using an ME 10 in IPH and an ME 0 in game?
Chrom Saber
Heir of the New Eden
#1708 - 2014-12-26 12:18:02 UTC  |  Edited by: Chrom Saber
The BPO was set to be ME 0% and PE 0% (as it is in the game as well).

I tried different ME levels in IPH but the material requirements did not change in any way in the IPH component listing. Not even if I tried it with multiple runs like 1000. It was always 8 integrity response drones for each produced unit.

Edit: It seems that in the testing version (3.1) this has been fixed and the small tower materials are correct.
Adalind Olaris
Olaris Enterprises
#1709 - 2014-12-27 18:11:35 UTC
Did a fresh install, played around with it, and found that when favorites or owned bp are selected and I select no decrypter and use only the sym decrypter, that is what is causing the error. If i go back and select none, it works fine.
Zifrian
The Frog Pond
Ribbit.
#1710 - 2014-12-29 01:44:23 UTC
Adalind Olaris wrote:
Did a fresh install, played around with it, and found that when favorites or owned bp are selected and I select no decrypter and use only the sym decrypter, that is what is causing the error. If i go back and select none, it works fine.

OK thanks. I figured it out. You saved your T2 BPC's as owned and it errors because it doesn't take into account decryptors correctly. If you want to get around the error for now, unmark your T2 BPCs as owned. I'm trying to figure something out since a lot of people do this but the solution isn't that simple.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
IVICI
BERATNA'S GAS
TERRA REGNUM
#1711 - 2014-12-29 03:54:12 UTC
M8s can someone tell about IPH for Mac os? Is it exist?
IVICI
BERATNA'S GAS
TERRA REGNUM
#1712 - 2014-12-29 12:24:10 UTC
So anyone know about iph for Mac os?
Cat Harkness
Twilight Labs
The Serenity Initiative
#1713 - 2014-12-29 18:33:54 UTC
Yesterday and Today when I open IPH 3.1 the loading time was several min. Is this working correct or is there something on my end I need to change.


Thanks

Cat Harkness

CEO

Twilight Labs
Zifrian
The Frog Pond
Ribbit.
#1714 - 2014-12-29 19:58:44 UTC
Cat Harkness wrote:
Yesterday and Today when I open IPH 3.1 the loading time was several min. Is this working correct or is there something on my end I need to change.


Thanks

Try unchecking the update teams via crest in settings. They might have stopped it and it could gum up things.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder
Grandial
Stride with Ease
#1715 - 2014-12-29 21:48:45 UTC
IVICI wrote:
So anyone know about iph for Mac os?

short answer, no.
I can't speak for the maker of this program, but the chance that it'll ever come is very slim
Cat Harkness
Twilight Labs
The Serenity Initiative
#1716 - 2014-12-30 03:02:50 UTC
Zifrian wrote:
Cat Harkness wrote:
Yesterday and Today when I open IPH 3.1 the loading time was several min. Is this working correct or is there something on my end I need to change.


Thanks

Try unchecking the update teams via crest in settings. They might have stopped it and it could gum up things.



That fixed the problem.

Since teams are going away it makes sense.

Thanks

Cat Harkness

CEO

Twilight Labs
Faith Cassidy
Sebiestor Tribe
Minmatar Republic
#1717 - 2014-12-31 14:48:23 UTC
Feature idea

Ore compression based on needed minerals and refining skills
Gilbaron
The Scope
Gallente Federation
#1718 - 2014-12-31 17:43:09 UTC
i still have problems with blueprint data being reset every now and then :( (only the ME/TE part)
Elena Thiesant
The Scope
Gallente Federation
#1719 - 2014-12-31 18:18:41 UTC
I've found a fair number of blueprints (picked up from assets search) as Copy Yes, Owned No, however they are BPOs. How does this happen
Zifrian
The Frog Pond
Ribbit.
#1720 - 2015-01-01 13:56:28 UTC
Gilbaron wrote:
i still have problems with blueprint data being reset every now and then :( (only the ME/TE part)

All bps or just some?

Elena Thiesant wrote:
I've found a fair number of blueprints (picked up from assets search) as Copy Yes, Owned No, however they are BPOs. How does this happen

It's suppose to use BPOs whenever available. I'll take a look. All copies are marked as not owned when imported though. I still have issues with T2 BPCs.

Maximze your Industry Potential! - Download EVE Isk per Hour!

Import CCP's SDE - EVE SDE Database Builder