These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Ships & Modules

 
  • Topic is locked indefinitely.
 

Sansha killing in a Harby
Author
Previous Topic Next Topic
Niall R
Nagles Capital Management
#1 - 2011-12-16 07:13:42 UTC
[Harbinger, 0.0 Sansha]

Heavy Modulated Pulse Energy Beam I, Imperial Navy Multifrequency M
Heavy Modulated Pulse Energy Beam I, Imperial Navy Multifrequency M
Heavy Modulated Pulse Energy Beam I, Imperial Navy Multifrequency M
Heavy Modulated Pulse Energy Beam I, Imperial Navy Multifrequency M
Heavy Modulated Pulse Energy Beam I, Imperial Navy Multifrequency M
Heavy Modulated Pulse Energy Beam I, Imperial Navy Multifrequency M
Heavy Modulated Pulse Energy Beam I, Imperial Navy Multifrequency M
Prototype Cloaking Device I

Y-S8 Hydrocarbon Afterburners
Cap Recharger II
Cap Recharger II
Cap Recharger II

Armor EM Hardener II
Armor EM Hardener II
Armor Thermic Hardener II
Armor Thermic Hardener II
Medium Armor Repairer II
Heat Sink II

Medium Capacitor Control Circuit I
Medium Capacitor Control Circuit I
Medium Capacitor Control Circuit I


Infiltrator I x5


How does this look for ratting in Stain? I've a little experience with 0.0 ratting, but this is the first fit I've made friom scratch for it.

I'm more than open to suggestions.
DarkAegix
Center for Advanced Studies
Gallente Federation
#2 - 2011-12-16 08:05:44 UTC
Replace those drones with Gallente ones.
Lunkwill Khashour
Ministry of War
Amarr Empire
#3 - 2011-12-16 09:32:40 UTC
Modify your lows and rigs as follows:
[Harbinger, 0.0 Sansha v2]

Heat Sink II
Armor EM Hardener II
[Empty Low slot]
Armor Thermic Hardener II
Medium Armor Repairer II
Heat Sink II

Medium Anti-EM Pump I
Medium Anti-Thermic Pump I
[Empty Rig slot]


Hammerhead I x5


I changed two hardeners to rigs, changed the drones and added a heat sink. It is still cap stable with perfect skills. If you have less than perfect skills and want cap stability, use the empty rig OR low slot for a cap module. The other slot is up to you, I'ld suggest another heat sink for more dps. Alternatively, you can add a cap module and remove a cap recharger thereby freeing up a mid slot for you to use.

The above fit, with empty slots! puts out 606dps vs your fit, which does 493 with perfect skills and no implants. Your EHP vs Sansha drops from 27k to 26k. Ask yourself why you need cap stability for belt ratting? Your cap needs to last only as long as the belt takes and can replenish just fine during warp.
Vachir Khan
Rugged Ruff and Ready
#4 - 2011-12-16 09:51:55 UTC
Your fit will depends very much on how safe your space is, so if you're deep in friendly territory, pay attention to intel channels or perhaps have access to a friendly POS in system to hide in you can use a normal combat focussed ship. If this is less the case then you really want to have a cloak on that ship and, would it be possible, an MWD as well.

Assuming your space is safe have a look at this, if you can't use T2 pulses yet I would advise to cram beams in there otherwise your range is going to be balls.

[Harbinger, Sansha ratting]
Medium Armor Repairer II
Armor EM Hardener II
Armor Thermic Hardener II
Heat Sink II
Heat Sink II
Heat Sink II

10MN Afterburner II
Tracking Computer II, Optimal Range
Cap Recharger II
Cap Recharger II

Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
[empty high slot]

Medium Anti-EM Pump I
Medium Anti-Thermic Pump I
Medium Capacitor Control Circuit I


Hobgoblin II x5
Hornet EC-300 x5