These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Ships & Modules

 
  • Topic is locked indefinitely.
 

pyfa 1.15.0 (Vanguard)

First post First post First post
Author
Previous Topic Next Topic
Sable Blitzmann
24th Imperial Crusade
Amarr Empire
#641 - 2014-10-02 05:45:43 UTC
Balthazar Lestrane wrote:
Darkblad wrote:
Both of you might check what happens when you rename your .pyfa folder (WIN-R, then %USERPROFILE%\.pyfa) and try to run 1.5 again. The warning on the github page (and the update notification dialog when running pyfa 1.4.0)
Quote:
WARNING: This release introduces a new data migration process, while also attempting to convert modules on existing fits to conform with Oceanus Module Tiericide initiative. Please backup fits / user files before updating.
made me aware of possible issues. No luck with active 1.4.0 profile, but after renaming the profile, 1.5.0 launched just fine. Certainly without any user data.

Update: error_log.txt content of my attempt to launch 1.5.0 with existing user profile.


That fixed it! Thanks very much for all the help, I can't tolerate EFT at all. Lol


it indeed does work, but there is a new update now that will work better. ;)

Bienator II wrote:
feature idea:
let us fit a clone like a ship and simply select them via dropdown box for each ship.

edit: 1.5.1 works great, tested in windows and linux ;)

Not sure what you mean by clone. Do you mean character?
Darkblad
Doomheim
#642 - 2014-10-02 06:51:42 UTC
Darkblad wrote:
Both of you might check what happens when you rename your .pyfa folder (WIN-R, then %USERPROFILE%\.pyfa) and try to run 1.5 again. The warning on the github page (and the update notification dialog when running pyfa 1.4.0)
Quote:
WARNING: This release introduces a new data migration process, while also attempting to convert modules on existing fits to conform with Oceanus Module Tiericide initiative. Please backup fits / user files before updating.
made me aware of possible issues. No luck with active 1.4.0 profile, but after renaming the profile, 1.5.0 launched just fine. Certainly without any user data.

Update: error_log.txt content of my attempt to launch 1.5.0 with existing user profile.
1.5.1 fixed this for me, it launched fine with the existiing .pyfa\ profile of 1.4.0.
Thank you for the quick fix!

NPE – ISD – RIP
Sable Blitzmann
24th Imperial Crusade
Amarr Empire
#643 - 2014-10-02 07:29:41 UTC
Sonny Mogwai wrote:
There seems to be a mistake in Cheetah powergrid. Pyfa shows 21.1MW but it is actually 20.1 in game. Unfortunately this cost me unnecessary purchases of implants etc, but now I have either offline one mode or to replace the implant.


Cheetah actually has 15 powergrid, and it's being correctly shown in Pyfa. Double check your fit and your character.
Arcos Vandymion
Ministry of War
Amarr Empire
#644 - 2014-10-02 08:02:46 UTC  |  Edited by: Arcos Vandymion
Sable Blitzmann wrote:

Bienator II wrote:
feature idea:
let us fit a clone like a ship and simply select them via dropdown box for each ship.

edit: 1.5.1 works great, tested in windows and linux ;)

Not sure what you mean by clone. Do you mean character?


I recon he wants to create Character bound Implant sets representing his Jumpclones than be allowed to select, possibly via the character selection, said jumpclones to see the changing stats of entirely different implant sets on a ship without having to refit every single implant and noting stats down for either.

How likely would it be to have the "Ships" market tree to select our hulls? I'm not very keen on the alphabetical listing TBH.

Effective DPS is pretty awesome, damage and resist profiles here:
Quote:
http://forum.battleclinic.com/index.php?topic=186216.0


Using above damage and resist and damage profiles (it was a pain putting them into PYFA for the first time ...) and rightclicking to select a damage profile is kind of weird as it doesn't seem to sort the trees alphabetically though. What I mean with that is that the "Ammo : E" folder is displayed below two of the "Rats : " folders of damage profiles, while the folders for Hybrid and Projectile ammo is displayed above.


-snip-
Sonny Mogwai
Dreaming Tree
#645 - 2014-10-02 13:06:00 UTC
Sable Blitzmann wrote:
Sonny Mogwai wrote:
There seems to be a mistake in Cheetah powergrid. Pyfa shows 21.1MW but it is actually 20.1 in game. Unfortunately this cost me unnecessary purchases of implants etc, but now I have either offline one mode or to replace the implant.


Cheetah actually has 15 powergrid, and it's being correctly shown in Pyfa. Double check your fit and your character.


Hmm, I run out of ideas.

Pyfa screenshot:
http://i.imgur.com/t8JZDdU.png

In-game fitting, same character:
http://i.imgur.com/C9Vt4Sj.png

I am not saying I am right, I am simply struggling to resolve it.
Sonny Mogwai
Dreaming Tree
#646 - 2014-10-02 13:36:12 UTC
Sonny Mogwai wrote:
Sable Blitzmann wrote:
Sonny Mogwai wrote:
There seems to be a mistake in Cheetah powergrid. Pyfa shows 21.1MW but it is actually 20.1 in game. Unfortunately this cost me unnecessary purchases of implants etc, but now I have either offline one mode or to replace the implant.


Cheetah actually has 15 powergrid, and it's being correctly shown in Pyfa. Double check your fit and your character.


Hmm, I run out of ideas.

Pyfa screenshot:
http://i.imgur.com/t8JZDdU.png

In-game fitting, same character:
http://i.imgur.com/C9Vt4Sj.png

I am not saying I am right, I am simply struggling to resolve it.


I think I found the problem.
Beta Reactor Control: Reaction Control (10% PG bonus) is no longer available.
It was replaced by :
Beta Reactor Control: Diagnostic System I (5% PG bonus).

Should it not be removed from pyfa to avoid confusion then?
I thought it was simple 1 to 1 name change.
Sable Blitzmann
24th Imperial Crusade
Amarr Empire
#647 - 2014-10-02 15:25:32 UTC
Sonny Mogwai wrote:
Sonny Mogwai wrote:
Sable Blitzmann wrote:
Sonny Mogwai wrote:
There seems to be a mistake in Cheetah powergrid. Pyfa shows 21.1MW but it is actually 20.1 in game. Unfortunately this cost me unnecessary purchases of implants etc, but now I have either offline one mode or to replace the implant.


Cheetah actually has 15 powergrid, and it's being correctly shown in Pyfa. Double check your fit and your character.


Hmm, I run out of ideas.

Pyfa screenshot:
http://i.imgur.com/t8JZDdU.png

In-game fitting, same character:
http://i.imgur.com/C9Vt4Sj.png

I am not saying I am right, I am simply struggling to resolve it.


I think I found the problem.
Beta Reactor Control: Reaction Control (10% PG bonus) is no longer available.
It was replaced by :
Beta Reactor Control: Diagnostic System I (5% PG bonus).

Should it not be removed from pyfa to avoid confusion then?
I thought it was simple 1 to 1 name change.


Ah, you didn't tell me what module you were using on cheetah, so I thought you were discussing base stats.

Beta Reactor Control: Reaction Control I should have been converted to Compact Reactor Control Unit as per Oceanus module tiericide, and it is no longer available in pyfa.

The problem is you are not using an up to date pyfa version. You are at least many releases out of date (no mining stats button, cargo support, and it seems no rack separation).

Since you're many releases behind, I recommend backing up your fits with File -> Backup All Fittings, just in case. Then please download and install latest pyfa version (v1.5.1): https://github.com/DarkFenX/Pyfa/releases
Sable Blitzmann
24th Imperial Crusade
Amarr Empire
#648 - 2014-10-02 15:47:27 UTC  |  Edited by: Sable Blitzmann
Arcos Vandymion wrote:
I recon he wants to create Character bound Implant sets representing his Jumpclones than be allowed to select, possibly via the character selection, said jumpclones to see the changing stats of entirely different implant sets on a ship without having to refit every single implant and noting stats down for either.


Yeah, we would like to make implants in general more intuitive by creating implant sets. However that is a huge feature and no one has started on it, not sure when it will come around

Arcos Vandymion wrote:

How likely would it be to have the "Ships" market tree to select our hulls? I'm not very keen on the alphabetical listing TBH.


Probably not very likely. This is a basic design philosophy of pyfa, to keep market and ships separated. Not only that but it's also a legacy thing. Note that the current ship market tree in the game is fairly new and intuitive. It is now in the form of Frigates -> Standard -> Faction -> ship. Pyfa is old, and a couple years ago (before CCP start re balancing), it was not so neatly refined. It was basically what you currently see in pyfa's ship section (might have bee a tad bit more refined, I do not remember that well).

There have been many conversations on making the ships navigation more refined, much like the market tree. However, it would be difficult as the ship browser stages are more or less hardcoded to three: Categories > Ships > Fits, and it probably will stay that way in the foreseeable future.

There are many different ways to help with navigation tho: search feature, race selector (at bottom), and the green arrow that restricts result to ships / categories that you already have fits in.

Arcos Vandymion wrote:

Effective DPS is pretty awesome, damage and resist profiles here:
Quote:
http://forum.battleclinic.com/index.php?topic=186216.0


Using above damage and resist and damage profiles (it was a pain putting them into PYFA for the first time ...) and rightclicking to select a damage profile is kind of weird as it doesn't seem to sort the trees alphabetically though. What I mean with that is that the "Ammo : E" folder is displayed below two of the "Rats : " folders of damage profiles, while the folders for Hybrid and Projectile ammo is displayed above.


-snip-


Wait, I didn't sort the hierarchy? /o\ so much fail... I will see what I can do, but that feature was a PITA to figure out so I'm not promising anything.

We also have a basic set of profiles on our wiki: https://github.com/DarkFenX/Pyfa/wiki/Effective-DPS This was based on that reddit post on the BC topic. But yeah, manually entering many profiles is always a drag.
Bienator II
madmen of the skies
#649 - 2014-10-02 16:22:51 UTC  |  Edited by: Bienator II
Sable Blitzmann wrote:

Bienator II wrote:
feature idea:
let us fit a clone like a ship and simply select them via dropdown box for each ship.

edit: 1.5.1 works great, tested in windows and linux ;)

Not sure what you mean by clone. Do you mean character?

jumpclone. implant slots 1-10 and save it as it would be a ship. In other words add a pod as ship to the ship list.

later, for each ship, you can select from a dropdown box the clone instead of selecting implant sets for every ship you fit.

how to fix eve: 1) remove ECM 2) rename dampeners to ECM 3) add new anti-drone ewar for caldari 4) give offgrid boosters ongrid combat value
Sonny Mogwai
Dreaming Tree
#650 - 2014-10-02 17:22:38 UTC
Sable Blitzmann wrote:
Sonny Mogwai wrote:
Sonny Mogwai wrote:
Sable Blitzmann wrote:
Sonny Mogwai wrote:
There seems to be a mistake in Cheetah powergrid. Pyfa shows 21.1MW but it is actually 20.1 in game. Unfortunately this cost me unnecessary purchases of implants etc, but now I have either offline one mode or to replace the implant.


Cheetah actually has 15 powergrid, and it's being correctly shown in Pyfa. Double check your fit and your character.


Hmm, I run out of ideas.

Pyfa screenshot:
http://i.imgur.com/t8JZDdU.png

In-game fitting, same character:
http://i.imgur.com/C9Vt4Sj.png

I am not saying I am right, I am simply struggling to resolve it.


I think I found the problem.
Beta Reactor Control: Reaction Control (10% PG bonus) is no longer available.
It was replaced by :
Beta Reactor Control: Diagnostic System I (5% PG bonus).

Should it not be removed from pyfa to avoid confusion then?
I thought it was simple 1 to 1 name change.


Ah, you didn't tell me what module you were using on cheetah, so I thought you were discussing base stats.

Beta Reactor Control: Reaction Control I should have been converted to Compact Reactor Control Unit as per Oceanus module tiericide, and it is no longer available in pyfa.

The problem is you are not using an up to date pyfa version. You are at least many releases out of date (no mining stats button, cargo support, and it seems no rack separation).

Since you're many releases behind, I recommend backing up your fits with File -> Backup All Fittings, just in case. Then please download and install latest pyfa version (v1.5.1): https://github.com/DarkFenX/Pyfa/releases


I kept my pyfa up to date (or at least I thought so), but at some point installer could not recognize correct path and installed a new version into:
D:/Program Files/pyfa/pyfa
rather than
D:/Program Files/pyfa
so I had multiple versions installed.

Now reinstalled into correct folder pyfa wouldn't launch at all.
Which exe file should I run? pyfa.exe? Seems like there is a lot of rubbish in that folder now.
There is pyfa-1.1.20-rubicon-1.1-win there but not oceanus related file.
Sable Blitzmann
24th Imperial Crusade
Amarr Empire
#651 - 2014-10-02 17:34:42 UTC
Sonny Mogwai wrote:

I kept my pyfa up to date (or at least I thought so), but at some point installer could not recognize correct path and installed a new version into:
D:/Program Files/pyfa/pyfa
rather than
D:/Program Files/pyfa
so I had multiple versions installed.

Now reinstalled into correct folder pyfa wouldn't launch at all.
Which exe file should I run? pyfa.exe? Seems like there is a lot of rubbish in that folder now.
There is pyfa-1.1.20-rubicon-1.1-win there but not oceanus related file.


Sounds like you have some cleanup to do. Delete D:/Program Files/pyfa/ and start over, don't keep old versions. Oceanus release is at the top of the page I linked. Here's a direct link to the latest release: https://github.com/DarkFenX/Pyfa/releases/tag/v1.5.1 Download buttons are on the bottom. I don't know where you are getting pyfa-1.1.20-rubicon-1.1-win but that release is 10 months old.

Windows has two versions: simple zip file, and an installer. Installer is easier and will install over older installed versions. The file you should run is pyfa.exe. Yes, the root folder is messy, but it's been that way for years. Make sure you are running the correct version by going to Help -> About. It should list v1.5.1 as the version.

Here's a direct link to the latest installer: https://github.com/DarkFenX/Pyfa/releases/download/v1.5.1/pyfa-1.5.1-oceanus-1.0-win.exe

Hope that helps.
Endo Dy
V0LTA
WE FORM V0LTA
#652 - 2014-10-02 21:37:55 UTC
Downloaded 1.5.1 and working fine Bear
Sonny Mogwai
Dreaming Tree
#653 - 2014-10-03 02:01:52 UTC
Sable Blitzmann wrote:


Sounds like you have some cleanup to do. Delete D:/Program Files/pyfa/ and start over, don't keep old versions. Oceanus release is at the top of the page I linked. Here's a direct link to the latest release: https://github.com/DarkFenX/Pyfa/releases/tag/v1.5.1 Download buttons are on the bottom. I don't know where you are getting pyfa-1.1.20-rubicon-1.1-win but that release is 10 months old.

Windows has two versions: simple zip file, and an installer. Installer is easier and will install over older installed versions. The file you should run is pyfa.exe. Yes, the root folder is messy, but it's been that way for years. Make sure you are running the correct version by going to Help -> About. It should list v1.5.1 as the version.

Here's a direct link to the latest installer: https://github.com/DarkFenX/Pyfa/releases/download/v1.5.1/pyfa-1.5.1-oceanus-1.0-win.exe

Hope that helps.


Thanks. I have had correct installer downloaded already. Before I delete anything.... Where are all fits kept in? Wouldn't like to lose hundreds of my fittings.
Sable Blitzmann
24th Imperial Crusade
Amarr Empire
#654 - 2014-10-03 03:15:10 UTC
Sonny Mogwai wrote:


Thanks. I have had correct installer downloaded already. Before I delete anything.... Where are all fits kept in? Wouldn't like to lose hundreds of my fittings.


By default (unless you've messed with the config file), fits are stored in a file called saveddata.db in %USERPROFILE%\.pyfa.
Sonny Mogwai
Dreaming Tree
#655 - 2014-10-03 12:49:48 UTC
Sable Blitzmann wrote:
Sonny Mogwai wrote:


Thanks. I have had correct installer downloaded already. Before I delete anything.... Where are all fits kept in? Wouldn't like to lose hundreds of my fittings.


By default (unless you've messed with the config file), fits are stored in a file called saveddata.db in %USERPROFILE%\.pyfa.


I haven't messed with anything at all. Frankly quite opposite.

Uninstalled pyfa, deleted the folder, installed it back, run pyfa.exe and... nothing happens. No error message, nothing. Simply wouldn't start.

This is my error_log.txt content:

https://justpaste.it/hfaf
Couldn't post it here, thats why external link.
Sonny Mogwai
Dreaming Tree
#656 - 2014-10-03 13:04:15 UTC
Sonny Mogwai wrote:
Sable Blitzmann wrote:
Sonny Mogwai wrote:


Thanks. I have had correct installer downloaded already. Before I delete anything.... Where are all fits kept in? Wouldn't like to lose hundreds of my fittings.


By default (unless you've messed with the config file), fits are stored in a file called saveddata.db in %USERPROFILE%\.pyfa.


I haven't messed with anything at all. Frankly quite opposite.

Uninstalled pyfa, deleted the folder, installed it back, run pyfa.exe and... nothing happens. No error message, nothing. Simply wouldn't start.

This is my error_log.txt content:

https://justpaste.it/hfaf
Couldn't post it here, thats why external link.


OK, I got it working again. For folks who may experience similar problems here is what I did:
- Uninstall everything
- Backup .pyfa folder and delete it from %USERPROFILE%
- Install fresh pyfa
- copy saved earlier saveddata.db to .pyfa folder

Thanks for your help.
Sable Blitzmann
24th Imperial Crusade
Amarr Empire
#657 - 2014-10-03 16:53:11 UTC
Sonny Mogwai wrote:


https://justpaste.it/hfaf
Couldn't post it here, thats why external link.


That error happens on 1.5.0. It seems you did not download the version I suggested at first. But at least it's working now. Please double check your version from Help > About. I don't want you to work with outdated data. =)
Sonny Mogwai
Dreaming Tree
#658 - 2014-10-03 18:40:22 UTC
Sable Blitzmann wrote:
Sonny Mogwai wrote:


https://justpaste.it/hfaf
Couldn't post it here, thats why external link.


That error happens on 1.5.0. It seems you did not download the version I suggested at first. But at least it's working now. Please double check your version from Help > About. I don't want you to work with outdated data. =)


All is good now. Thanks again.
Kar Andor
Caldari Provisions
Caldari State
#659 - 2014-10-03 20:43:52 UTC  |  Edited by: Kar Andor
Pyfa - How to copy fittings on a Mac?

I do like using Pyfa and have it installed in both my Mac and and windows box, but prefer to edit my fittings on the Mac. However, I don't know how to copy those fittings from Pyfa when using my Mac. On windows I can hit ctrl+c and it will show the options window, on the Mac that key combination never works.

Can someone please help me with this?

Thanks in advance
Sable Blitzmann
24th Imperial Crusade
Amarr Empire
#660 - 2014-10-04 00:50:24 UTC
Kar Andor wrote:
Pyfa - How to copy fittings on a Mac?

I do like using Pyfa and have it installed in both my Mac and and windows box, but prefer to edit my fittings on the Mac. However, I don't know how to copy those fittings from Pyfa when using my Mac. On windows I can hit ctrl+c and it will show the options window, on the Mac that key combination never works.

Can someone please help me with this?

Thanks in advance


CMD+C should work. Does it not?

Also, look into this to share the fit database between both platforms: https://github.com/DarkFenX/Pyfa/wiki/Cross-Platform-Data-Sharing