These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Issues, Workarounds & Localization

 
  • Topic is locked indefinitely.
 

Launcher works, client not responding fresh XP install

First post
Author
Previous Topic Next Topic
Chris Predragovic
Doomheim
#1 - 2013-06-02 02:05:55 UTC
I've read a lot of topics about this (outdated), usually it worked until it didn't. For me it just doesn't work, with no error messages. Eve makes a minimized window, but it always ends up "not responding". My graphics card supports the shader. I have updated directx. I've tried everything that I've seen mentioned. Can someone help me? Eve runs fine on my **** computer, but doesn't on this one?
Nakami Saans
Conclave of Independent Pilots
#2 - 2013-07-14 18:23:29 UTC
This is exactly the problem I'm having! I have been looking everywhere for a solution and have found nothing that works -_-

People: "You shouldn't burn bridges." Me: "I don't, I bomb them from orbit."
CCP Atropos
C C P
C C P Alliance
#3 - 2013-07-15 14:51:19 UTC
Have you attempted to run the logserver.exe along side the client? You can find out more information here: http://wiki.eveonline.com/en/wiki/Logserver
Feylix Thairin
Imperial Academy
Amarr Empire
#4 - 2013-07-31 15:52:14 UTC  |  Edited by: Feylix Thairin
I'm having this exact issue. I have run the log sever along side it and the log gets stuck repeating " 1663 2013.07.31 15:51:11:301 Trinity is using the regular device" (this is a fresh example)

P.S."904 2013.07.31 15:50:47:517 UpdateCrashKeyValues loop starting" sounds kinda fishy...
Nakami Saans
Conclave of Independent Pilots
#5 - 2013-08-08 06:15:00 UTC
Feylix Thairin wrote:
I'm having this exact issue. I have run the log sever along side it and the log gets stuck repeating " 1663 2013.07.31 15:51:11:301 Trinity is using the regular device" (this is a fresh example)


This is the same thing that's happening with my computer. I have the workspace saved if anybody as CCP would like to see it.

People: "You shouldn't burn bridges." Me: "I don't, I bomb them from orbit."
Kazuma Gaterau
The Scope
Gallente Federation
#6 - 2013-08-12 07:42:42 UTC
Nakami Saans wrote:
Feylix Thairin wrote:
I'm having this exact issue. I have run the log sever along side it and the log gets stuck repeating " 1663 2013.07.31 15:51:11:301 Trinity is using the regular device" (this is a fresh example)


This is the same thing that's happening with my computer. I have the workspace saved if anybody as CCP would like to see it.


I have this too.
Any fix yet? Reinstalled client and didn't help
CCP Aporia
C C P
C C P Alliance
#7 - 2013-08-12 16:38:03 UTC
You guys do have DirectX installed, yes? And it is at least Windows XP SP2?

Friend of walking avatars, currently hibernating until he gets to open that door.
Dangerous Tech
Caldari Provisions
Caldari State
#8 - 2013-08-12 21:43:32 UTC
I'm no tech expert. but this happened to me following hard drive replacement. fixed by updating my ATI drivers for graphics card
Feylix Thairin
Imperial Academy
Amarr Empire
#9 - 2013-08-19 18:05:07 UTC  |  Edited by: Feylix Thairin
CCP Aporia wrote:
You guys do have DirectX installed, yes? And it is at least Windows XP SP2?

I have direct X installed, though i recently found i don't have a 3D Graphics card X_X... I'm not a certified techy either but it looks to me like i don't have ANY graphics card in this box.
P.S. i built this comp with parts from other dead ones... aaaaand i'm guessing the graphics card was that board which "wow it didn't need this to run soooo...." and it's somewhere in my brother's black hole of a car trunk. T-T i will edit this again if i fix it.
Soruko Charante
Strategic Exploration and Development Corp
Silent Company
#10 - 2013-10-18 22:11:05 UTC  |  Edited by: Soruko Charante
I have Vista, but this sounds like the same problem that I am having. I just reinstalled too. I thought I might have missed something, but I've gone through everything I can think of, DirectX, drivers, etc. My log server doesn't get the trinity error though, it gets stuck repeating this:


43765 2013.10.18 20:54:24:082 HRES:FFFFFFFF - none(none)
Can't rebind at this time, D3D resource creation not allowed.
43766 2013.10.18 20:54:24:106 Orphan'd event. ProcessDeviceChange doesn't have any listeners
43767 2013.10.18 20:54:24:114 Unable to initialize NVAPI: pl0Å
43768 2013.10.18 20:54:24:115 Orphan'd event. ProcessDeviceChange doesn't have any listeners
43769 2013.10.18 20:54:24:119 Unable to initialize NVAPI: ˆe
43770 2013.10.18 20:54:24:126 Orphan'd event. ProcessDeviceChange doesn't have any listeners
43771 2013.10.18 20:54:24:134 Unable to initialize NVAPI: ˆe
Securitas Protector
Horde Vanguard.
Pandemic Horde
#11 - 2013-10-19 09:08:58 UTC
I have the exact same issue on 8.1. It started immediately after I installed 8.1 though
CCP Atropos
C C P
C C P Alliance
#12 - 2013-10-21 14:41:50 UTC
Soruko Charante wrote:
I have Vista, but this sounds like the same problem that I am having. I just reinstalled too. I thought I might have missed something, but I've gone through everything I can think of, DirectX, drivers, etc. My log server doesn't get the trinity error though, it gets stuck repeating this:


43765 2013.10.18 20:54:24:082 HRES:FFFFFFFF - none(none)
Can't rebind at this time, D3D resource creation not allowed.
43766 2013.10.18 20:54:24:106 Orphan'd event. ProcessDeviceChange doesn't have any listeners
43767 2013.10.18 20:54:24:114 Unable to initialize NVAPI: pl0Å
43768 2013.10.18 20:54:24:115 Orphan'd event. ProcessDeviceChange doesn't have any listeners
43769 2013.10.18 20:54:24:119 Unable to initialize NVAPI: ˆe
43770 2013.10.18 20:54:24:126 Orphan'd event. ProcessDeviceChange doesn't have any listeners
43771 2013.10.18 20:54:24:134 Unable to initialize NVAPI: ˆe

This look like a graphics related problem though, since it references D3D. I would recommend running the DirecXRedist.exe that ships in the bin folder of the EVE Client.
Chance Harper
Doomheim
#13 - 2013-10-22 12:25:22 UTC
@ the people still using XP.
make sure you have the latest DX 9 installed and atleast SP2 latho why stay with SP2 if there is a SP3

@Soruko Charante
there might be some driver issue, it cannot initialize a connection to your Nvidia card. Check for new Mainboard drivers and try installing older drivers for the graphicscard.
Thorian Crystal
Viziam
Amarr Empire
#14 - 2013-11-18 17:39:52 UTC
I can't even find my own old posts unless I post something new?