These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

EVE Information Portal

 
  • Topic is locked indefinitely.
 

EVE Online: Odyssey 1.1 Issues

First post
Author
Previous Topic Next Topic
Zip Slings
SCI Zenith
Flying Dangerous
#141 - 2013-09-03 19:14:45 UTC
Skill queue groups:

Should Shield Upgrades be under Engineering instead of Shields? If Engineering is now the group for all skills that increase your fitting capabilities and Weapon Upgrades and AWU have been moves there then shouldn't all the rest of the skills that affect those attributes also be in Engineering?
Xevan Templar
7th Batavian Squadron
#142 - 2013-09-03 19:24:08 UTC
I was in the 'stuck at applying 3/4 stuff'' group.

A first restart of the launcher didn't do it, I had to restart the eve launcher 5 times and now it works. So just keep trying peeps.
Timberton
Timberton Holdings
#143 - 2013-09-03 19:27:13 UTC
Fleet window->broadcast history

If a member of a fleet broadcasts "Align to", you are unable to find the warp/align menus on r-click sub menu. The broadcast is however align-able and warp-able by using the default shortcuts (A and S respectively) while selecting the broadcast line.

If the member broadcasts "warp to" instead, then r-clik menu works as expected and one can select align or warp from it. This does not happen with "align to" broadcast.
MiKasha Duan
Heuristic Intentions Inc.
#144 - 2013-09-03 19:28:54 UTC
Using the Mac client.

While scanning in a wh I noticed that the markerson the map which identify items like wormholes do not match the green markers of those locations when scanned to 100%. (I have a screen shot if you need it).

This may be link to the problem of not being able to warp to sites that have been scanned to 100%.
Example: I am in a wormhole and am using sisters combat probes to scan exits. I have 5 sites on my scanner tab:
HGA-989 Wormhole -->
HOE-431 Gas Site 1.0%
HRH-110 Wormhole 100%
JOW-849 Gas Site 100%
ZOR-487 Wormhole -->

I select ZOR and click "warp to" but my ship does not move, acting like I am already at that location. I click HRH to warp there instead and "warp to" is not an option, all I have are "ignore result", "ignore other results", and "clear result".

I pull my probes back and relaunch then in pinpoint formation. Center them on my location and scan again. Now the green marker lines up with my position on the map and I can right click to save the location.

I move the probes to the HRH location in pinpoint formation, no change. I widen my probes to cover the large red sphere that is displayed when clicking on the HRH item in the scanner menu, probes at 64 AU, and not I can warp to the location.

I retract my probes. On the map, the white markers showing the wormholes still do not march with the green markers. When I save the location, the pin is placed at the white marker. (just fyi)

It seems there are some other oddities as well, I have clicked "warp to within 10" and been warped to 0, I have also clicked "warp to 0" and been warped 10 or more clicks out. Also, the red markers (dot, circle, and sphere) do not seem to march properly with the scanned item. For example, I was scanning a location and though centered on the red dot and a result showing in the menu, the % never changed from zero. Another example is right now I have all but one site green, a gas site at 2.3% currently. Yet ther are three red spheres on the map. This is a bit confusing.

Cheers,
Mikasha
ElQuirko
University of Caille
Gallente Federation
#145 - 2013-09-03 19:40:04 UTC
Stuck at 0.0% "3/4 applying patch". Restarted, currently re-downloading. 700mb is a lot to have to redownload.

Dodixie > Hek
Teh Nurffe
Trillium Invariant
Honorable Third Party
#146 - 2013-09-03 19:45:37 UTC
ElQuirko wrote:
Stuck at 0.0% "3/4 applying patch". Restarted, currently re-downloading. 700mb is a lot to have to redownload.


DON'T WORRY IT WILL NOT WORK LolLolLolLol

CCP FIX YOUR ****** PATCHER EvilEvilEvilEvilEvilEvil
Circuit Judge
Circuit Court
#147 - 2013-09-03 20:00:26 UTC  |  Edited by: Circuit Judge
Im getting a black screen on the character selection. Trying repair now.


Fixed.
CCP TomB
C C P
C C P Alliance
#148 - 2013-09-03 20:01:50 UTC
Sandeep wrote:
2. Auto-targeting missiles de-activates when the missile's target is untargeted. Workaround: Don't target it in the first place.


Verified and will fix, thanks man.
Hayuno
Republic University
Minmatar Republic
#149 - 2013-09-03 20:03:38 UTC  |  Edited by: Hayuno
I don't understand wtf is going on, I've deleted everything and started over and it still isn't working, except once when the launcher failed miserably and it let me start the game regardless, keeps trying to create and apply APPLYING EVE_ONLINE_598940-598940_WIN.PATCH: 0.0%, it's not even downloading anything, simply keeps trying to create this (file size varies between 3.5-6+mb) and apply.

Even if I don't delete the file it does this: (2/4): CREATING EVE_ONLINE_598940-598940_WIN.PATCH 22.5%
Mehashi 'Kho
New Eden Motion Pictures
#150 - 2013-09-03 20:05:25 UTC
ElQuirko wrote:
Stuck at 0.0% "3/4 applying patch". Restarted, currently re-downloading. 700mb is a lot to have to redownload.

I hear that, I've used all the available bandwidth I could spare trying to patch this multiple times to no success. With the 3 accounts paid for but unusable for the next 3 weeks that's a real term cost of almost 30 pounds for this fuckup of a patch.

Do I bother trying again in 3 weeks time? I'm not holding my breath the problem will be acknowledged by then.

(https://forums.eveonline.com/default.aspx?g=posts&t=274756 same problem)

Staggered that this hasn't been addressed when it is affecting so many people.
Daenika
Chambers of Shaolin
#151 - 2013-09-03 20:07:28 UTC
Crossposting from the feedback thread, since it's technically an "issue" with the patch.

Quote:
Genolution CA-2 implant set bonus reduced from 50% to 40%


Seems to be an issue with these notes. The 50% bonus provided a net boost of 3.375% to both PG and CPU (1.5% base bonus, increased by 50% (multiplicative) twice for the set bonus). Reducing it to 40% would result in only a 2.94% boost. However, data on Tranq is showing a 3.154% boost, which is consistent with a 45% set bonus, rather than a 40%.

Are the patch notes wrong and the intended set bonus is 45%, or did the change go through incorrectly. Ie. should we be expecting another reduction to the potency of these implants compared to their current live performance?
Eve TheScorpion Altol
Viziam
Amarr Empire
#152 - 2013-09-03 20:07:41 UTC
Launcher fail to create patch file for Odyssey 1.1 stuck on 48.3%
Tried the Repair tool (v3.52) but fails with IOError: [Errno 13] Permission denied
Tried with admin rights -failed
tried with launcher in safe mode -failed
restarted PC.
and all failed again (1 day after renewing my subscription)
Tried the "start Eve" option after launcher fails to create patch file at 48.3%
it downloaded a 6mb file within EVE
Eve online update Setup started doing its thing (making progress)
But fails ... Logfile was created
C:\Users\"username"\AppData\Local\Temp\nso8C39.tmp\win_patch.exe.txt
Tried Repair tool again (V3.52) as it suggested - fails at (4/7) 32.2%
with IOError: [Errno 13] Permission denied
Crosi Wesdo
War and Order
#153 - 2013-09-03 20:11:09 UTC
Drone issue;

When im engaging someone and they are shooting my drones. As my drone reaches structure it sometimes disappears from my drone window but its sat stationary in space. These drones can be recovered in the normal way a few moments later.

Happened twice in the space of an hour earlier.
Hayuno
Republic University
Minmatar Republic
#154 - 2013-09-03 20:17:37 UTC  |  Edited by: Hayuno
FOR EVERYONE HAVING PROBLEMS AT 100% aPPLY:
Try going into C:\Program Files (x86)\CCP\EVE\bin And using the exefile in there to boot the game without going through the launcher

(Plz send me isk if it works :P)
Electra Rye
Perkone
Caldari State
#155 - 2013-09-03 20:29:41 UTC
I'm having problem updating my mac client. Anyone have a workaround?
acemastr Ocer
Viziam
Amarr Empire
#156 - 2013-09-03 20:29:43 UTC
Unable to complete my mission due to not being able to move slaves from the cargo container, 'Loot all' button or dragging has no effect at all, just lost standing for that :(
T'Khlau
Somnium Vita
#157 - 2013-09-03 20:31:43 UTC
MiKasha Duan wrote:
Using the Mac client.

While scanning in a wh I noticed that the markerson the map which identify items like wormholes do not match the green markers of those locations when scanned to 100%. (I have a screen shot if you need it).

This may be link to the problem of not being able to warp to sites that have been scanned to 100%.
Example: I am in a wormhole and am using sisters combat probes to scan exits. I have 5 sites on my scanner tab:
HGA-989 Wormhole -->
HOE-431 Gas Site 1.0%
HRH-110 Wormhole 100%
JOW-849 Gas Site 100%
ZOR-487 Wormhole -->

I select ZOR and click "warp to" but my ship does not move, acting like I am already at that location. I click HRH to warp there instead and "warp to" is not an option, all I have are "ignore result", "ignore other results", and "clear result".

I pull my probes back and relaunch then in pinpoint formation. Center them on my location and scan again. Now the green marker lines up with my position on the map and I can right click to save the location.

I move the probes to the HRH location in pinpoint formation, no change. I widen my probes to cover the large red sphere that is displayed when clicking on the HRH item in the scanner menu, probes at 64 AU, and not I can warp to the location.

I retract my probes. On the map, the white markers showing the wormholes still do not march with the green markers. When I save the location, the pin is placed at the white marker. (just fyi)

It seems there are some other oddities as well, I have clicked "warp to within 10" and been warped to 0, I have also clicked "warp to 0" and been warped 10 or more clicks out. Also, the red markers (dot, circle, and sphere) do not seem to march properly with the scanned item. For example, I was scanning a location and though centered on the red dot and a result showing in the menu, the % never changed from zero. Another example is right now I have all but one site green, a gas site at 2.3% currently. Yet ther are three red spheres on the map. This is a bit confusing.

Cheers,
Mikasha

Same here FFS
This a royal pain in the F**king arse. Scanning down sites in a wh is completely borked. You didn't check this did you?
Thanks Q&A

acemastr Ocer
Viziam
Amarr Empire
#158 - 2013-09-03 20:33:21 UTC  |  Edited by: acemastr Ocer
*ignore*
Soleil Fournier
Fliet Pizza Delivery
Of Essence
#159 - 2013-09-03 20:39:31 UTC
Tried to submit a bug report for the launcher issue but got "an unexpected error has occurred please try again later" twice.

Restarting the launcher has not worked for me.
Ender Airuta
State War Academy
Caldari State
#160 - 2013-09-03 20:45:37 UTC
It would be nice for CCP/Devs to step up with an update... Well over 8 hours and no substantive response to myriad problems.

I've decided to wait a bit before I start the journey through the depths of hell in trying to update, as I usually have to d/l the client again. Plexpayers deserve a better response than this.