Macintosh

Launcher starts fine, verifies client and then the client opens in a resolution that I did not set and I get this error:

"Unhandled page fault on read access to 0x1d1bfff0 at address 0xffff08f6. Do you wish to debug it ?"

Selecting yes or no closes the client and no debugging ever takes place.

Specs:

Model Name: MacBook Pro
Model Identifier: MacBookPro6,2
Processor Name: Intel Core i7
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 4 MB
Memory: 4 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0C
SMC Version (system): 1.58f17
Serial Number (system): W803444QAGW
Hardware UUID: 0D118081-261B-55EB-8679-CAAE09B9AEB0
Sudden Motion Sensor:
State: Enabled

NVIDIA GeForce GT 330M:

Chipset Model: NVIDIA GeForce GT 330M
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0a29
Revision ID: 0x00a2
ROM Revision: 3560
gMux Version: 1.9.21
Displays:
Color LCD:
Resolution: 1440 x 900
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Display Connector:
Status: No Display Connected


I don't believe this is a hardware issue. I've used the EVE Clonemaker to dualbox and both of my clones startup fine and run the client as per usual. I've run the repair tool a few times but no luck there. I would love to get this fixed without doing a full reinstall of the client as I'm on limited bandwidth..

Any ideas?