These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Ships & Modules

 
  • Topic is locked indefinitely.
 

what happened to sensor boosters?
Author
Previous Topic Next Topic
ARGH69
Caldari Provisions
Caldari State
#1 - 2012-12-12 16:48:35 UTC
haven't played in a long time. did they nerf sensor booster tech 2? my current fitting is showing considerably less scan res than what i remember it....
ARGH69
Caldari Provisions
Caldari State
#2 - 2012-12-12 17:10:25 UTC
signal amplifiers in the low slots give the bonus to scan res before sensor boosters are activated but not after. scan res is stil 612 with or without signal amplifiers in the low slots... very confused!

are attributes not showing up correctly now or have ccp changed scan res in some way??
Alara IonStorm
#3 - 2012-12-12 17:14:15 UTC  |  Edited by: Alara IonStorm
ARGH69 wrote:
haven't played in a long time. did they nerf sensor booster tech 2? my current fitting is showing considerably less scan res than what i remember it....

Was this before Scripts? There are 2 scripts you can load like Ammo, Target Range and Scan Res.

It is a +30% Increas to both Target Range and Scan Res w/o Scripts and a 60% Increase to one of them depending on the Script.

ARGH69 wrote:
signal amplifiers in the low slots give the bonus to scan res before sensor boosters are activated but not after. scan res is stil 612 with or without signal amplifiers in the low slots... very confused!

are attributes not showing up correctly now or have ccp changed scan res in some way??

Not really sure what that is about. Sig Amps give very little Scan Res so if you have a bunch of Boosters the Stacking Penalties would put them on the bottom of the pile making no noticeable increase. If not it might be a bug.
ARGH69
Caldari Provisions
Caldari State
#4 - 2012-12-12 17:17:26 UTC
its with scan res scripts.

my setup is exactly the same as before. used to get around 850 scan res but now it is 612 and it is still 612 even with or without signal amplifiers.

it is a very delicate setup. i cannot pvp without knowing exactly what is going on.
ARGH69
Caldari Provisions
Caldari State
#5 - 2012-12-12 17:20:19 UTC
the mids are completely filled with sensor boosters and the stacking penalties are indeed heavy but there should still be some kind of scan res increase with a signal amplifier, even a 1 point increase, but there is not.

i need to know what they changed in the past year or so.
Alara IonStorm
#6 - 2012-12-12 17:20:34 UTC
ARGH69 wrote:
its with scan res scripts.

my setup is exactly the same as before. used to get around 850 scan res but now it is 612 and it is still 612 even with or without signal amplifiers.

it is a very delicate setup. i cannot pvp without knowing exactly what is going on.

What ship class and how many Sebo's / Sig Amps do you have on it and when is the last time you used it when it had this 850 Scan Res?
ARGH69
Caldari Provisions
Caldari State
#7 - 2012-12-12 17:29:32 UTC
its a sniping battleship.

"Changed Ionic Field Projector and Targeting System Subcontroller rigs to ensure that they correctly receive stacking penalties when used alongside modules that affect the same attribute"

i found this. is this true, it's what they changed? i have subcontrollers on the fitting. this sucks, majorly.
Zoltan Lazar
#8 - 2012-12-12 18:40:29 UTC
Basically means that you have the stacking penalties you were supposed to have all along.