These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Science & Industry

 
  • Topic is locked indefinitely.
 

Can somebody make sense of this?

Author
Jas Dor
Republic University
Minmatar Republic
#1 - 2012-04-20 03:28:27 UTC  |  Edited by: Jas Dor
A mobile assembly facility where advanced subsystems and hulls of strategic cruisers can be manufactured

3 manufacturing slots:
Base time multiplier: 1.0
Base material multiplier: 1.0

(Note: Tech III hulls cannot be assembled at starbase structures. The hulls and subsystems can only be assembled whilst docked in a station.)

So what can you build at a subsystem assembly array? Can either subsystems or hulls be assembled at a station outside of 0.0?

Also do I need to link the output to ship maintenance bay?
Mitamonehjsd
The Scope
Gallente Federation
#2 - 2012-04-20 05:36:28 UTC
Jas Dor wrote:
A mobile assembly facility where advanced subsystems and hulls of strategic cruisers can be manufactured

(Note: Tech III hulls cannot be assembled at starbase structures. The hulls and subsystems can only be assembled whilst docked in a station.)



You can build (manufacture) subsystems and hulls from subsystem components. But, unlike normal ship, you need to bring all the subsystems to a station to assemble the ship and "unpack" it.


Jas Dor wrote:
Also do I need to link the output to ship maintenance bay?

No because you can't "eject" it from a maintenance bay. You really need to assemble the hull and the subsystems hence why the Note as a warning.

Jas Dor wrote:
Can either subsystems or hulls be assembled at a station outside of 0.0?

You can anchor the assembly facility up to SOMETHING in high sec so you can manufacture in high sec. I don't remember the exact limit so I'll let you search for it. You can assemble the hulll and subsystems anywhere from 0.0 to jita.
Tau Cabalander
Retirement Retreat
Working Stiffs
#3 - 2012-04-20 06:07:10 UTC  |  Edited by: Tau Cabalander
Jas Dor wrote:
So what can you build at a subsystem assembly array? Can either subsystems or hulls be assembled at a station outside of 0.0?

Also do I need to link the output to ship maintenance bay?

You can build T3 Subsystems and T3 hulls at a POS. Subsystem Assembly Arrays can be anchored in 0.7 sec or lower.

You don't need a Ship Maintenance Array to build T3 as you cannot assemble (fit the subsystems to the hull) T3 ships at a POS. Assembly can only be done at a station or outpost. You have to haul the completed hulls and subsystems to the station or outpost.

T3 are the only ships that have to be assembled at a station or outpost.