These forums have been archived and are now read-only.

The new forums are live and can be found at https://forums.eveonline.com/

Ships & Modules

 
  • Topic is locked indefinitely.
 

One Rorqual line is blocked
Author
Previous Topic Next Topic
Stralow
Caldari Provisions
Caldari State
#1 - 2012-04-15 19:56:42 UTC
Hi there

We have a problem with our Rorqual. One of the compression lines is blocked. All of our rorq pilots have checked it, nobody has the job installed. So our assumption is, that the pilot who installed it never delivered it and is not in our corp anymore.

So how we get that line free again?

i say we take off and nuke the whole site from orbit. it's the only way to be sure
Syrias Bizniz
some random local shitlords
#2 - 2012-04-15 20:04:31 UTC
I'd say, petiton it.
Alexa Coates
Center for Advanced Studies
Gallente Federation
#3 - 2012-04-16 02:00:58 UTC
Syrias Bizniz wrote:
I'd say, petiton it.

pretty much this. or you can always do it the **** way and blow it the **** up.Twisted

That's a Templar, an Amarr fighter used by carriers.
Revman Zim
Infinite Point
The Initiative.
#4 - 2012-04-16 04:43:53 UTC
Totally out of my area of expertise, but what about repackaging the ship? You would lose the rigs, but if you are using a Rorqual, I would assume you can afford the replacement costs.

I have had issues with ships in the past and this has worked.
Baneken
Arctic Light Inc.
Arctic Light
#5 - 2012-04-16 05:19:30 UTC
It's working as intended; if you cancel the job the manufacturing slot still stays reserved for as long as the job was intended to last.
If the above is not the case then repackaging should do the trick, though you will loose the rigs, with T2 rigs you might want to check from a GM first.